alcatel 5045t dead Need Help

sujangsm

Active Member
Nov 1, 2016
55
51
dhaka,bangladesh
plz sir i need help alcatel 5045t canot restore its backup
set is dead now
before flash i have read its file set is virus infected after scan set dead now writ file error
Card found : S/N : 3F39398A , v0134
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6737 , Project : jhz6735m_35u_m , Storage : EMMC
Files found : 12 , Set to Flash : 11
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : TCL
Device Model : PIXI4_5_4G
Device CPU : MT6735
Device IntName : 5045T
Device Version : 6.0
Device Compile : 12/12/2016 4:14:45 AM
Device Project : alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P96
Device ExtInfo : 5045T
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 56 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 504E01FE35394A31764B124B6D44134D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , K59J1
[eMMC] : FLASH_CID : FE014E50314A39354B124B764D13436D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000001D3000000
[eMMC] : FLASH_UCP : 7472 MiB [eMMC 8 GiB]
DEV RID : 0x476F0D98C7A9D959A236C3685421D9C4
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6737 , Project : jhz6735m_35u_m , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3277 mV
BL : [WARNING] : BatteryLevel LOW!!!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000002C00000-0x0000000007400000
Erase : 0x000000000A800000-0x00000001C4C00000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_jhz6735m_35u_m.bin
Preloader Init Failed! Looks like HW error or incompatible image
ErrCode :

Operation Failed
Elapsed: 00:00:16
Reconnect Power/Cable!



this is read file log


Start at : [1/5/2017 / 12:01:17 AM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 56 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 504E01FE35394A31764B124B6D44134D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , K59J1
[eMMC] : FLASH_CID : FE014E50314A39354B124B764D13436D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000001D3000000
[eMMC] : FLASH_UCP : 7472 MiB [eMMC 8 GiB]
DEV RID : 0x476F0D98C7A9D959A236C3685421D9C4
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : TCL
ProdName : 5045T
ProdModel : 5045T
Device : PIXI4_5_4G
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P96

[Read Ok] : preloader_jhz6735m_35u_m.bin
[Read Ok] : simlock.img
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / jhz6735m_35u_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2409 MiB
Scatter saved to : C:\Documents and Settings\Administrator\Desktop\read file\MT6735__TCL__5045T__PIXI4_5_4G__6.0__alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P96\

All done!
 
  • Like
Reactions: Abdullah
Top