Help a83 dead after Give error during fectory reset

[papoo]

a83 came with USB not recognized error so i decide to reset pattern with ISP pin out give error during fectory reset.
now set dead please help me any one.


here is log
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 00**6
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HBG4a2 (0x484247346132), rev: 0xA5, serial number: 0xC6C55D41
Manufacturing date: Apr 2018
CID: 90014A48 42473461 32A5C6C5 5D4145FC
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

Factory Reset...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 13/16384 inodes and 2091/65536 blocks
Writing cache... Wrote 45376587 blocks, expected to write 65536 blocks
Done
Creating filesystem with parameters:
Size: 25069334528
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 6120443
Block groups: 187
Reserved block group size: 1024
Created filesystem with 11/1531904 inodes and 140186/6120443 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E0C0C4
Wrote 50411262 blocks, expected to write 6120443 blocks
Done
Done

 

[papoo]

Here is Info

Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 00*6
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HBG4a2 (0x484247346132), rev: 0xA5, serial number: 0xC6C55D41
Manufacturing date: Apr 2018
CID: 90014A48 42473461 32A5C6C5 5D4145FC
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6763, cpu abi: arm64-v8a
manufacturer: OPPO
board: full_oppo6763_17101, name: A83js
brand: OPPO, model: OPPO A83js ()
build model list: OPPO A83js ()
build id: N6F26Q, version: 7.1.1 Nougat (A83jsEX_11_A.30_190923)
build description: full_oppo6763_17101-user 7.1.1 N6F26Q 1569255204 release-keys

crypto state: encrypted?
Selected: [HYNIX] H9TQ26ACLTMCUR/32GB (BGA221)

 

[xpress_banha]

same problem try write fatory flash but failed in flash