Chimera Mobile Phone Utility version: 26.88.1044 @ 2020-12-12
Printing phone history
Repair started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A205G
Carrier ID: CHO
Sales Code: CHO
Country Code: Chile
Timezone: Africa/Johannesburg
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Fri Sep 20 03:03:04 KST 2019
PDA Version: A205GUBS3ASI4 [september 2019, rev4]
Phone Version: A205GNDXS3ASI4 [september 2019, rev4]
CSC Version: A205GOWO3ASI4 [september 2019, rev4]
Board Platform: EXYNOS5
Modem Platform: SHANNON327
Serial Number: R58XXXXXXXX
Imei: 3559XXXXXXXXXX
Battery Status: 3.86V (40%)
Network Type: GSM
SIM Status: LOADED
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2019-09-01
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Appropriate serial port is not available.
1. On the dial window, enter *#0808# 2. Select DM+ACM+ADB or DM+MODEM+ADB 3. Click the Ok on phone display 4. Wait a few seconds until the diag port is initialized 5. Click Ok button
Trying to enable diagnostic mode. Be patient! Do NOT disconnect the phone!
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Succeeded.
Trying on port SAMSUNG Mobile USB Serial Port (COM1497)
Diag mode available on port SAMSUNG Mobile USB Serial Port (COM1497)
Processing. Be patient! Do NOT disconnect the phone!
Current imei: 35590XXXXXXX
Repaired imei: 35590XXXXXXXX
Successfully finished.
Finished at local time: [12.12.20 07:53:04]
WorkID: 118490663
Chimera Mobile Phone Utility version: 26.88.1044 @ 2020-12-12
Printing phone history
Repair IMEI
12/12/2020
5:50
AM
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A205G
Carrier ID: CHO
Sales Code: CHO
Country Code: Chile
Timezone: Africa/Johannesburg
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Fri Sep 20 03:03:04 KST 2019
PDA Version: A205GUBS3ASI4 [september 2019, rev4]
Phone Version: A205GNDXS3ASI4 [september 2019, rev4]
CSC Version: A205GOWO3ASI4 [september 2019, rev4]
Board Platform: EXYNOS5
Modem Platform: SHANNON327
Serial Number: R58XXXXXX
Imei: 355907XXXXXXXX
Battery Status: 3.88V (43%)
Network Type: GSM
SIM Status: LOADED
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-09-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
The phone must be started in recovery mode to be rooted!
To start recovery, you must use a key combo at startup. Usually [volume_up + power] or [volume_up + bixby + power].
Without root the patchcert will not work!
Restarting phone in recovery mode...
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [12.12.20 08:18:43]
WorkID: 118491449
Printing phone history
Repair started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A205G
Carrier ID: CHO
Sales Code: CHO
Country Code: Chile
Timezone: Africa/Johannesburg
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Fri Sep 20 03:03:04 KST 2019
PDA Version: A205GUBS3ASI4 [september 2019, rev4]
Phone Version: A205GNDXS3ASI4 [september 2019, rev4]
CSC Version: A205GOWO3ASI4 [september 2019, rev4]
Board Platform: EXYNOS5
Modem Platform: SHANNON327
Serial Number: R58XXXXXXXX
Imei: 3559XXXXXXXXXX
Battery Status: 3.86V (40%)
Network Type: GSM
SIM Status: LOADED
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2019-09-01
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Appropriate serial port is not available.
1. On the dial window, enter *#0808# 2. Select DM+ACM+ADB or DM+MODEM+ADB 3. Click the Ok on phone display 4. Wait a few seconds until the diag port is initialized 5. Click Ok button
Trying to enable diagnostic mode. Be patient! Do NOT disconnect the phone!
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Succeeded.
Trying on port SAMSUNG Mobile USB Serial Port (COM1497)
Diag mode available on port SAMSUNG Mobile USB Serial Port (COM1497)
Processing. Be patient! Do NOT disconnect the phone!
Current imei: 35590XXXXXXX
Repaired imei: 35590XXXXXXXX
Successfully finished.
Finished at local time: [12.12.20 07:53:04]
WorkID: 118490663
Chimera Mobile Phone Utility version: 26.88.1044 @ 2020-12-12
Printing phone history
Repair IMEI
12/12/2020
5:50
AM
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A205G
Carrier ID: CHO
Sales Code: CHO
Country Code: Chile
Timezone: Africa/Johannesburg
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Fri Sep 20 03:03:04 KST 2019
PDA Version: A205GUBS3ASI4 [september 2019, rev4]
Phone Version: A205GNDXS3ASI4 [september 2019, rev4]
CSC Version: A205GOWO3ASI4 [september 2019, rev4]
Board Platform: EXYNOS5
Modem Platform: SHANNON327
Serial Number: R58XXXXXX
Imei: 355907XXXXXXXX
Battery Status: 3.88V (43%)
Network Type: GSM
SIM Status: LOADED
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-09-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
The phone must be started in recovery mode to be rooted!
To start recovery, you must use a key combo at startup. Usually [volume_up + power] or [volume_up + bixby + power].
Without root the patchcert will not work!
Restarting phone in recovery mode...
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [12.12.20 08:18:43]
WorkID: 118491449