UFi a047f recovery stuck kgstatus: locked need help

[qweaq]

i need help
whats the processs to open a phone
i want to on full phone only
phone connectd with isp
next what to do

 

[arhanmobile]

i need help
whats the processs to open a phone
i want to on full phone only
phone connectd with isp
next what to do

you have to do full flash then only it will be fine. If you do it using ISP, it will take a lot of time. You can remove the chip and flash it directly, it will be easier for you.

 

[qweaq]

you have to do full flash then only it will be fine. If you do it using ISP, it will take a lot of time. You can remove the chip and flash it directly, it will be easier for you.

flash with latest bit or same bit ?

 

[arhanmobile]

flash with latest bit or same bit ?

You can do it in the same bit or in the latest bit.

 

[qweaq]

You can do it in the same bit or in the latest bit.

i tried full flash with same bit but still phone dead

 

[qweaq]

i tried full flash with same bit but still phone dead

Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-1803
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DP6DBB (0x445036444242), rev: 0x00, serial number: 0x89196AD2
Manufacturing date: Jul 2022
CID: 15010044 50364442 42008919 6AD27952
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 17010]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
userdata fs: extfs
Internal storage: 50.32 GiB
crypto state: unencrypted
eMMC selected: [SAMSUNG] KMDP6000DB-BXXX/64GB

this is last info after flash

 

[arhanmobile]

Connection status: EHCI:HUB:HUB[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-1803
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DP6DBB (0x445036444242), rev: 0x00, serial number: 0x89196AD2
Manufacturing date: Jul 2022
CID: 15010044 50364442 42008919 6AD27952
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 17010]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
userdata fs: extfs
Internal storage: 50.32 GiB
crypto state: unencrypted
eMMC selected: [SAMSUNG] KMDP6000DB-BXXX/64GB

this is last info after flash

Can you send me log before flash