UMT [28-01-25] UMTv2/UMTPro UltimateMTK2 v1.8.1 - Anti-Crack Info and Bugfix

[SPYROS]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.8.1
The Ultimate MediaTek Tool

Please login to view image

Please login to view image

What's New:

Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions

Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now


Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983

Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets


Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)

Some other minor improvements


Added Read Anti-Crack Info
- Helpful to know information about device and possibly reason of Anti-Crack Message

Fixed Slow Startup and Hanging Issue





Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[jaanjaan]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.8
The Ultimate MediaTek Tool

Please login to view image

Please login to view image

What's New:

Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions

Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now


Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983

Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets


Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)

Some other minor improvements







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

good update but my quistion is why som phone after reset pl mode bootloadre unlock and restart first logo and dm verity error or orange state error can u solve this update
best regard.

 

[dany_boy]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.8
The Ultimate MediaTek Tool

Please login to view image

Please login to view image

What's New:

Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions

Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now


Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983

Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets


Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)

Some other minor improvements







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

Good update. But all users waiting for Vivo mtk update please confirm that Vivo update coming soon or later

 

[starservice]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.8
The Ultimate MediaTek Tool

Please login to view image

Please login to view image

What's New:

Updated Infinix/Tecno Enable ADB (META)
- Added SLA Auth Support
- Fixed ADB Not Enabled on some firwmare versions

Tested Devices:
- Infinix Hot 11 (X689F)
- Tecno Spark 20 Pro 5G (KJ8)
- All devices should be supported now


Updated Infinix V4 PL Exploit
- MT6835
- MT6855
- MT6895
- MT6983

Supported Models:
- Infinix Note 40 5G (X6852)
- Infinix Note 40 Pro 5G (X6851)
- Tecno Phantom X2 Pro 5G (AD9)
- Tecno Spark 30 5G (KL8)
- and others based on above Chipsets


Added Samsung MT6768 PL Exploit
- Samsung A05 (SM-A055F)

Some other minor improvements







Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

after update new version lagging issues if operated any command including startup the apps perhaps on;y in me but after update have lag problem

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : META Functions (Enable ADB (Infinix))
Checking for exisitng device in META mode...No Device!
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Connecting Device...OK [SLA] Auth OK
Waiting for Device [META]...OK
Port : MediaTek USB VCOM (Android) (COM3)
Brand : TECNO
Model : TECNO BF7
Market Name : unknown
Market Name : unknown
Manufac. : TECNO
Build Date : Fri Oct 11 23:53:46 CST 2024
Ven. Date : Fri Oct 11 23:17:37 CST 2024
Platform : MT6761
OEM : unknown
OEM Device : unknown
Disp. ID : BF7-H6127ABCDSTUAdAeAfArAs-S-GL-241011V2349
Inc. Ver. : 241011V1838
Patch Level : 2024-10-05
OTA Ver. : unknown
BRAND : TECNO
MODEL : TECNO BF7
BUILD : BF7-H6127ABCDSTUAdAeAfArAs-S-GL-241011V2349
BUILD DATE : Fri Oct 11 23:53:46 CST 2024
Enabling ADB...Done
Operation Finished.
[UltimateMTK2 v1.8]
Log Saved : 20785419_105632.lo

 

[HAMZAGSM]

Bug Report App Performance Issues
Dear UMT Team,
I hope this message finds you well. I would like to bring to your attention an issue with the latest update.

• The app takes a considerable amount of time to open.
• Additionally, when clicking on the "Safe Format" option, it takes approximately two minutes to execute.

Kindly review and address these performance concerns at your earliest convenience.

Thank you for your attention to this matter.

 

[asif33]

Dear UMT Team,
I hope this message finds you well. I would like to bring to your attention an issue with the latest update.

• The app takes a considerable amount of time to open.
• Additionally, when clicking on the "Safe Format" option, it takes approximately two minutes to execute.

Kindly review and address these performance concerns at your earliest convenience.

Thank you for your attention to this matter.

 

[bronce]

Infinix Hot 50i X6531

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM85)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&38846b63&0&4
#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 142A3ACD18C98338119F7EBF1C3159DF
SoC ID[0] : EDD6329A8098FB5B9D8140BAB36255C0
SoC ID[1] : F970973FF974E5B3BB77A72363A8EB1A
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
HRID : 3CBFE79A89E3635EA67655C281509161
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : MMC256
CID : D62D004D4D4332353651298DC11DCA07
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003A40A00000 [233.01 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20250128_184325.log

 

[yousafawan]

UMT Team Please Add Anti-Crack Remove Option.

 

[GsmToto]

USING PL_EXLOIT [SAMS MT6833]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&186144f5&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6833 [0989] Dimensity 700 5G k6838
Details : 8A00,CA00,0000
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
MEID : 5BCE472E7F305F99C08A556C97B488C1
SoC ID[0] : 89766E9C7F1A6C5A0109EF50750AB3C9
SoC ID[1] : 6CBB039CBD5D534FA9858E769B0DE8BK
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : A658605F35FE1B344DA4B5092CF318DM
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : MT128GAXAU2U22
CID : 2C014D54313238474158415532553238
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Wed Aug 16 19:47:46 CST 2023
Display ID : LAVA_LXX503_SW_T_V06_HW_V1.0_20230816
Ver. Inc. : 1692186466
Locale : en-IN
Patch : 2023-08-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20560144_177681.log

 

[GsmToto]

USING PL_EXLOIT [VIVO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&81497bb&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 80ABE0C2B15C9CEF023C405471EA2FAC
SoC ID[0] : 6D9D428BB0236761E6A1981A12BCFF59
SoC ID[1] : F39976EEAA6B57008341FFF251C18BD9
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
HRID : 5CC73232479217B28C93BEAC2B6AF36F
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : QD63MB
CID : 150100514436334D42015CC096AB16DB
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 40%-50% LIFE TIME USED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
Brand : vivo
Manuf. : vivo
Model : vivo 1820
Device : PD1818HF_EX
And. Ver. : 8.1.0
Prod. Ver. : PD1818HF_EX_A_1.72.5
Prod. Name : PD1818HF_EX
Build Dt. : Mon Mar 27 15:17:50 CST 2023
Display ID : O11019 release-keys
Ver. Inc. : 1679901475
Locale : en-US
Patch : 2021-10-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20479217_147323.log

 

[GsmToto]

USING PL_EXLOIT [SAMS MT6765 [A04E]]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&16a0d3be&0&4
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8B4737384B6DA9344324BF7A5C89483M
SoC ID[0] : 42A073C818F837804F07375D4AF25BE3
SoC ID[1] : C3CE97CABD74DD9581138D5B8834A607
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
HRID : B6209C358393E4C483B63C9EA880E29M
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : 4X62MB
CID : 150100345836324D4200102B0797CAA4
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20895633_093421.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&16a0d3be&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : CD808B4276EA6890856A8CCD647437CF
SoC ID[0] : 17C0B56774C68358D5055D96ADA85338
SoC ID[1] : 63A51F610EC6E14F6B4D47EC999E9276
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ice.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B0100593250303332005BE5405A89BF [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : 716CD54F13F838466549DEABBE3C22D9
Int. RAM : 0x0000000000039000 [228.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : Y2P032
CID : 9B0100593250303332005BE5405A89BF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20453288_336594log

 

[GsmToto]

Brand/Model : Infinix/Tecno/iTel (ADB)
Operation : Disable Locks (ADB)
Searching for Device..Found
Brand : TECNO
Model : TECNO KJ5
Android Ver. : 13
Build : KJ5-H6931ABCDEFGHI-T-OP-241009V1507
Build Date : Wed Oct 9 00:41:01 CST 2024
Patch Level : 2024-09-05
Bootloader : unknown
Disabling Locks...Done
Please reboot phone to finish operation.
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20354686_647832.log

 

[Rajivsumanth]

umt add vivo 5g imei repair with latest security

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : META Functions (Enable ADB (Infinix))
Checking for exisitng device in META mode...No Device!
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Connecting Device...OK [SLA] Auth OK
Waiting for Device [META]...OK
Port : MediaTek USB VCOM (Android) (COM3)
Brand : TECNO
Model : TECNO KJ5
Market Name : unknown
Market Name : unknown
Manufac. : TECNO
Build Date : Wed Oct 9 00:41:01 CST 2024
Ven. Date : Tue Oct 8 23:51:51 CST 2024
Platform : MT6768
OEM : unknown
OEM Device : unknown
Disp. ID : KJ5-H6931ABCDEFGHI-T-OP-241009V1507
Inc. Ver. : 241008V1449
Patch Level : 2024-09-05
OTA Ver. : unknown
BRAND : TECNO
MODEL : TECNO KJ5
BUILD : KJ5-H6931ABCDEFGHI-T-OP-241009V1507
BUILD DATE : Wed Oct 9 00:41:01 CST 2024
Enabling ADB...Done
Operation Finished.
[UltimateMTK2 v1.8.1]
Log Saved : 20342104_186760.log