UMT [24-08-24] UMTv2/UMTPro QcFire v10.7 - Samsung KG Unlock and more..

UMT Box

SPYROS

Product Supporter
Jan 27, 2023
212
601
PK
We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v10.7
The Ultimate Qualcomm Tool




Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices





What's New:

Huawei

- Nova 10 (NCO-LX1)

Mason
- D450 (C1)

Samsung
- Galaxy A23 5G (SM-S236DL) BIT9
- Galaxy A70 (SM-A705FN) BIT5
- Galaxy M55 (SM-M556B) BIT2
- Galaxy S21 5G (SM-G991U) BIT-C
- Galaxy S21 Ultra 5G (SM-G998U) BIT-A
- Galaxy S21 Ultra 5G (SM-G998U) BIT-C
- Galaxy S21+ 5G (SM-G996U) BIT-C
- Galaxy S22 5G (SM-S901U) BIT6
- Galaxy S22+ 5G (SM-S906E) BIT-A
- Galaxy S22+ 5G (SM-S906U) BIT6
- Galaxy S23 (SM-S911B) BIT6
- Galaxy S23 (SM-S911W) BIT2
- Galaxy S23 FE (SM-S711U) BIT5
- Galaxy S24 Ultra (SM-S9280) BIT3
- Galaxy Z Fold 3 (SM-F926U) BIT5

Xiaomi
- Mi 10 (umi)
- Redmi Note 8T (willow)
- Redmi Y3 (onc)




Samsung KG Unlock (Samsung Special Group)
- Once operation finished, enter download mode.
- It will say KG : BROKEN
- You need to flash ZTO CSC (Brazil)
- You must have ZTO CSC Firmware for your device firmware version
- This method may not work on all devices.




Samsung OEM Unlock (Samsung Special Group)
- After Process is done by software, you need to enter download mode.
- Perform official method (eg. hold Vol UP for few seconds) for Unlock.
- You must perform OEM Unlock to write Knox Patched Firmware.
- This must be done without booting to operating system.
- This method may not work on all devices.


Added New HWID and Hashes to Internal Loader Database












CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram


Br,
UMT
 

abdullahlonati12

Active Member
Aug 20, 2017
19
1
lahore
We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v10.7
The Ultimate Qualcomm Tool





Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices





What's New:

Huawei

- Nova 10 (NCO-LX1)

Mason
- D450 (C1)

Samsung
- Galaxy A23 5G (SM-S236DL) BIT9
- Galaxy A70 (SM-A705FN) BIT5
- Galaxy M55 (SM-M556B) BIT2
- Galaxy S21 5G (SM-G991U) BIT-C
- Galaxy S21 Ultra 5G (SM-G998U) BIT-A
- Galaxy S21 Ultra 5G (SM-G998U) BIT-C
- Galaxy S21+ 5G (SM-G996U) BIT-C
- Galaxy S22 5G (SM-S901U) BIT6
- Galaxy S22+ 5G (SM-S906E) BIT-A
- Galaxy S22+ 5G (SM-S906U) BIT6
- Galaxy S23 (SM-S911B) BIT6
- Galaxy S23 (SM-S911W) BIT2
- Galaxy S23 FE (SM-S711U) BIT5
- Galaxy S24 Ultra (SM-S9280) BIT3
- Galaxy Z Fold 3 (SM-F926U) BIT5

Xiaomi
- Mi 10 (umi)
- Redmi Note 8T (willow)
- Redmi Y3 (onc)




Samsung KG Unlock (Samsung Special Group)
- Once operation finished, enter download mode.
- It will say KG : BROKEN
- You need to flash ZTO CSC (Brazil)
- You must have ZTO CSC Firmware for your device firmware version
- This method may not work on all devices.




Samsung OEM Unlock (Samsung Special Group)
- After Process is done by software, you need to enter download mode.
- Perform official method (eg. hold Vol UP for few seconds) for Unlock.
- You must perform OEM Unlock to write Knox Patched Firmware.
- This must be done without booting to operating system.
- This method may not work on all devices.


Added New HWID and Hashes to Internal Loader Database












CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use
UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.




How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram


Br,
UMT
please add poco x3 pro
 

sunilneo

Junior Member
Jun 21, 2020
3
1
nepal
We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v10.7
The Ultimate Qualcomm Tool





Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices





What's New:

Huawei

- Nova 10 (NCO-LX1)

Mason
- D450 (C1)

Samsung
- Galaxy A23 5G (SM-S236DL) BIT9
- Galaxy A70 (SM-A705FN) BIT5
- Galaxy M55 (SM-M556B) BIT2
- Galaxy S21 5G (SM-G991U) BIT-C
- Galaxy S21 Ultra 5G (SM-G998U) BIT-A
- Galaxy S21 Ultra 5G (SM-G998U) BIT-C
- Galaxy S21+ 5G (SM-G996U) BIT-C
- Galaxy S22 5G (SM-S901U) BIT6
- Galaxy S22+ 5G (SM-S906E) BIT-A
- Galaxy S22+ 5G (SM-S906U) BIT6
- Galaxy S23 (SM-S911B) BIT6
- Galaxy S23 (SM-S911W) BIT2
- Galaxy S23 FE (SM-S711U) BIT5
- Galaxy S24 Ultra (SM-S9280) BIT3
- Galaxy Z Fold 3 (SM-F926U) BIT5

Xiaomi
- Mi 10 (umi)
- Redmi Note 8T (willow)
- Redmi Y3 (onc)




Samsung KG Unlock (Samsung Special Group)
- Once operation finished, enter download mode.
- It will say KG : BROKEN
- You need to flash ZTO CSC (Brazil)
- You must have ZTO CSC Firmware for your device firmware version
- This method may not work on all devices.




Samsung OEM Unlock (Samsung Special Group)
- After Process is done by software, you need to enter download mode.
- Perform official method (eg. hold Vol UP for few seconds) for Unlock.
- You must perform OEM Unlock to write Knox Patched Firmware.
- This must be done without booting to operating system.
- This method may not work on all devices.


Added New HWID and Hashes to Internal Loader Database












CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use
UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.




How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram


Br,
UMT
Samsung m145f bit2 kg unlock not working
 
Dec 21, 2022
7
1
bangladesh
kg unlock not work



Device : Samsung Galaxy S22 Ultra 5G (SM-S908E) BITA
Operation : KG Unlock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM95)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.8
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-S908E_BITA.ufl]
Preparing Loader...Done
Sending Loader [SM-S908E_BITA]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [98]
Reading Device Information...OK [Sign]
Build : S908EXXU2BVJA
Int. Build : SM-S908E_SEA_DX_QKEY2
Updating KG Lock Data...FailedFailed
Operation Failed.
QcFire Ver. 10.7
 
  • Like
Reactions: tsui_thomas

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Wipe EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D72210472DD71E5B96DD5BB7233886E38F98FBDE6433FCE1D25A7B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM7150, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.2.0.SJGMIXM [Mon Jun 12 20:45:35 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Saving EFS Backup.......OK
EFS Backup : EFS_Xiaomi_2023-06-01_240826_114856.ueb
Reset EFS (Full).......Done
Operation Finished.
QcFire Ver. 10.7
 
  • Like
Reactions: tsui_thomas

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Samsung Galaxy A52 (SM-A525M) BIT6
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00002000
OPK_DATA : 58F6B27795E738C1333136F84F 23C171EB694BB67658FF2894F7D445E023070C
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525M_BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525M_BIT6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01DA3400] [0x00000800] [0x00000800] [0x00000400] [0x00025800] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [76]
Reading Device Information...OK
Software : TP1A.220624.014.A525MUBS9SJHT3, A525MUBS9SJHT3 [Thu Oct 5 22:11:29 KST 2023]
Android Ver. : 13
Patch Level : 2023-10-01
Resetting FRP Lock...Done
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 10.7
 
  • Like
Reactions: tsui_thomas

Alihyder112233

Active Member
Oct 3, 2020
24
3
karachi
Operation : Wipe EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D72210472DD71E5B96DD5BB7233886E38F98FBDE6433FCE1D25A7B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM7150, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.2.0.SJGMIXM [Mon Jun 12 20:45:35 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Saving EFS Backup.......OK
EFS Backup : EFS_Xiaomi_2023-06-01_240826_114856.ueb
Reset EFS (Full).......Done
Operation Finished.
QcFire Ver. 10.7
model?
 

Alihyder112233

Active Member
Oct 3, 2020
24
3
karachi
REDMI NOTE 10 PRO (SWEET) AUTH NOT WORKING ...
Device : Xiaomi Redmi Note 10 Pro (sweet)
Operation : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7150]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 10.4
 
Last edited:
  • Like
Reactions: GsmToto

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00B00 [8953] 67001500
OPK_DATA : 3B48AE9023196AE5C784CB52A55046D15110FD8B116888162BCE65CB66E9636C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_029]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK [57]
Reading Device Information...OK
Device : unknown
Software : System 8.2.0.036(1UW9) [Mon Feb 8 18:16:55 CST 2021]
Android Ver. : 8.1.0
Patch Level : 2020-09-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 10.7
 

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : OnePlus 7T
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500A00 [SD855] 854951054
OPK_DATA : 7A44FD44C35394A862D0E420FE0BEF04 0FECF30032DA08DC10E1B910D525491D
Initializing Protocol...OK
Using Pre-Defined Loader [OP_7T.ufl]
Preparing Loader...Done
Sending Loader [OP_7T]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SD855, UFS, 128 GB
LU Count : 6 [0x01CC5577] [0x00000800] [0x00000800] [0x00002000] [0x00100000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65522], Out: 1638454, Sector Size: 4096
Reading Partition Table...OK [122]
Reading Device Information...OK
Software : , 2004177334456 [Sun Apr 19 18:05:22 CST 2020]
Android Ver. : 10
Patch Level : 2020-03-01
Resetting FRP Lock...Failed
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 10.7
 

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00002000
OPK_DATA : 2AF9F125F0A5D0D5B09049181C64E5DF 2E8670228834D971627AA6E105908C6C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_006]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 64 GB
LU Count : 6 [0x00EC3400] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [78]
Reading Device Information...OK [Sign]
Build : A235MUBSDMKR9Z
Int. Build : SM-A235M_LA_TPA_QKEY2_RP5
Reset FRP... Done
Operation Finished.
QcFire Ver. 10.7
 

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Full Reset EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 9CBA94693C2333A56002F543B2A2 6AB1B4B3F1CF9E2BCF0E0E981C558748817D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_065]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [47]
Reading Device Information...OK
Device : Reliance RC555L [msm8937] [RC555L]
Brand : Orbic
Prod.Name : VZW_RC555L
Software : ORB555L_V1.1.1_BVZPP, 765b472 [2020年 12月 29日 星期二 19:32:43 CST]
Android Ver. : 7.1.2
Patch Level : 2020-01-01
Saving EFS Backup.......OK
EFS Backup : EFS_Reliance_RC555L_ORB555L_V1.1.1_BVZPP_2020-01-01_240831_103104.ueb
Reset EFS (Full).......Done
Operation Finished.
QcFire Ver. 10.7
 

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Xiaomi Redmi 10C (fog)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D721E5B92198FBDE6433FCE 1D25A7B0472DD76DD5BB7233886E38F
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 64 GB
LU Count : 6 [0x00D5F800] [0x00000800] [0x00000800] [0x00002000] [0x00180000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [94]
Reading Device Information...OK
Device : Xiaomi
Software : , V13.0.8.0.SGEMIXM [Thu May 11 19:43:02 CST 2023]
Android Ver. : 12
Patch Level : 2023-05-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 10.7
 

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BDE6433FCE 1D25A7B0472DD7BB7233886E38F2198F
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6250]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [90]
Reading Device Information...OK
Device : Xiaomi
Software : , V13.0.2.0.SJWEUXM [Thu Oct 13 22:42:23 CST 2022]
Android Ver. : 12
Patch Level : 2022-10-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6354364355
Phone : +17865685444678
Display ID : 46YQ-WNCJ-FGHD-JU3
Writing Data...Done
Operation Finished.
QcFire Ver. 10.7
 

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Xiaomi Redmi Note 10 (mojito)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1500900 [SM6150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [92]
Reading Device Information...OK
Device : Xiaomi
Software : , V13.0.11.0.SKGMIXM [Sat Dec 3 21:56:51 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 10.7
 

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Operation : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : curtana_global
Version : V12.5.5.0.RJWMSEKL
Code Base : 11
Serial : 0x8584V6JS5J
Ext Info : US, es, F, 2, 2
Model : Redmi Note 9S
Reading Partition Table...[90] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 10.7
 
  • Like
Reactions: tsui_thomas

GsmToto

Super Moderator
Jan 1, 2021
4,477
20,911
UK
Skype
gsmtoto
Sonork ID
100.1684601
Device : Xiaomi Redmi Note 10 Pro (sweet)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB726433FCE 1D25A7B0472DD733886E38F2198FBDE
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7150]...Write done
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 10.7
 
  • Like
Reactions: tsui_thomas
Top