UMT [22-06-24] UMTv2/UMTPro QcFire v10.2 - Xiaomi Auth Bypass...

[SPYROS]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v10.2
The Ultimate Qualcomm Tool




Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices - NEW!!!

What's New:


Updated Xiaomi Auth Bypass to support new devices:
- Black Shark 4
- Black Shark 4 Pro
- Black Shark 4S
- Black Shark 4S Pro
- Black Shark 5
- Black Shark 5 Pro
- Black Shark 5 RS
- Mi 10
- Mi 10T 5G
- Mi 10T Pro
- Mi 11
- Mi 11 Lite
- Mi 11 Lite 5G
- Mi 11 Pro
- Mi 11 Ultra
- Mi 11X
- Mi 11i
- Mi 8 Lite
- Mi 9
- Mi 9 Explorer
- Mi 9T
- Mi 9T Pro
- Mi A2
- POCO F3
- POCO F3 Pro
- POCO M2 Pro
- POCO X3 NFC
- POCO X3 Pro
- Redmi 10
- Redmi 10 Power
- Redmi 10C
- Redmi 7
- Redmi 7A
- Redmi 8
- Redmi 9 Power
- Redmi 9T
- Redmi K20
- Redmi K20 Pro
- Redmi K30S
- Redmi K40
- Redmi K40 Pro
- Redmi K40 Pro Plus
- Redmi Note 10
- Redmi Note 10 Lite
- Redmi Note 10 Pro
- Redmi Note 11
- Redmi Note 11 NFC
- Redmi Note 5
- Redmi Note 5 Pro
- Redmi Note 6 Pro
- Redmi Note 7
- Redmi Note 7S
- Redmi Note 8
- Redmi Note 8T
- Redmi Note 9 4G
- Redmi Note 9 Pro
- Redmi Note 9 Pro Max
- Redmi Note 9S
- Redmi Y3
- Apart from the models listed above, this method should work on others too
- If loader is not found, you can use loader from firmware for your device




Samsung
- Galaxy S10 Lite (SM-G770F) BIT9
- Galaxy Tab A 8.0 (SM-T295) BIT6








CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

Telegram

U.M.T (c) Official Support Chat


Br,
UMT

 

[an.khan143]

add poco f4.....

 

[GsmToto]

Vsmart Joy 4 V441A Reset FRP OK = UMT
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00006E01
OPK_DATA : 81DA57B83888BD89E7B9F8E61CEA4E49 2C15F443F14E9CE0D96745CA88174FCB
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665_004]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, UFS, 64 GB
LU Count : 6 [0x00EA2C00] [0x00000800] [0x00000800] [0x00000800] [0x00040000] [0x00001400]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [90]
Reading Device Information...OK
Software : , V441A_OPN_U_B3_220216 [Wed Feb 16 15:54:11 +07 2022]
Android Ver. : 11
Patch Level : 2022-01-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 10.2

 

[GsmToto]

Device : Samsung Galaxy S24 Ultra (SM-S928B) BIT2
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [S928B-BIT2.ufl]
Preparing Loader...Done
Sending Loader [S928B-BIT2]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 4 [0x03B84400] [0x00001000] [0x00001000] [0x0000D400]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK [Sign]
Build : S928BXXS2AXA8
Int. Build : SM-S928B_EUR_XX_QKEZ3
Reset FRP... Done
Operation Finished.
QcFire Ver. 10.2

 

[GsmToto]

Operation : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : surya_global
Version : V12.5.8.0.RJGADNY
Code Base : 11
Serial : 0x1698622R
Ext Info : US, es, F, 2, 2
Model : M2007J23DB
Reading Partition Table...[80] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 10.2

 

[qdoomdh]

note 10 pro (sweet) bypass auth not work

 

[mrazi]

note 10 pro (sweet) bypass auth not work

Yes. Not working for RN 10 Pro (sweet)

 

[Mttmoussa]

mi note 11 5g lisa anyone tried?