KXD Classic Core A07
KXD A07
reset frp bypass done
Wait...
S/N: 00387228C4 v0161
Chinese Miracle II - SP3 Service Tool v2.27
Init log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0
Build device list... Ok 1328
Ready
Selected: Kenxinda KXD-classic-A10 Boot [FF] FireFly mmc
[FF] protocol may be SLOW. For flash Read/Write use [FDL]
Selected: KXD A06 Boot [FF] FireFly mmc
[FF] protocol may be SLOW. For flash Read/Write use [FDL]
Selected: KXD A07 Boot [FF] FireFly mmc
[FF] protocol may be SLOW. For flash Read/Write use [FDL]
Operation: Connect KXD A07 Boot [FF] FireFly [v2.27]
Wait...
- Power device Off
- Connect cable [remember Vol+ | Vol-] [remember Test-Point]
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM58) vid 0x1782 pid 0x4D00
Handshake fail
Wrong connection mode?
Canceled
Finished 18 sec
Operation: Connect KXD A07 Boot [FF] FireFly [v2.27]
Wait...
- Power device Off
- Connect cable [remember Vol+ | Vol-] [remember Test-Point]
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM58) vid 0x1782 pid 0x4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec Ok
Dev UID: 7b0e7cdaccad614b1c6ea1af448cf01427fd5ab104f542a4be0b140b0d36fb20
get storage info...
EMMC
CID: 04010149534F434F4D11EF453FD08AE7 crc Ok
Vendor: Unknown 0x0004 OEM: 257 ID: 49534F434F4D [ISOCOM] PRV: 0x11
Serial: 4014292944 0xEF453FD0
MM/YY: 8/2023
CSD: D0FFFF329F5903FFFFFFFFEF964000FF
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01
EXTCSD rev1.8 EMMC 5.1 FW: 11
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x1000000 16.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 128 Gb Actual 0x1D1EC00000 116.48 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: Not defined
read extcsd... Ok
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_7b0e7cdaccad614b_extcsd_0004-Unknown_0x0004_ISOCOM_5.1_2024-07-09.bin
Verify config values... Ok
get partitions...
Partitions: 74
Connected
get sw info... 12 sec
Product Brand: KXD
Product Device: A07
Product Model: A07
Product Name: A07
SW: KXD/A07/A07:12/SP1A.210812.016/230103:user/release-keys
Patch Level: SP1A.210812.016
Display ID: A07_KXD_V1.03_oy_BJST_20231223
SW Version: 230103
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2022-11-05
Build Time: 23/12/2023 12:21:44
Product Info: A07
SW: s9863a1h10_Natv-user 12 SP1A.210812.016 51620 release-keys
Product Manfct: KXD
Product Board: s9863a1h10
Board Platform: sp9863a
Android ver: 12
UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]
Device ID: kxd-kxd-a07-s9863a1h10-a07
Strategy: [none|generic]
Firmware ID: SP9863A_KXD_A07_OSv12_A07_KXD_V1.03_oy_BJST_20231223_SP1A.210812.016_A07
Backup 8 items to: C:\InfinityBox\CM2SP3\backup\sp9863a_7b0e7cdaccad614b\
Read to C:\InfinityBox\CM2SP3\backup\sp9863a_7b0e7cdaccad614b\
Reading...
Read [1/74] prodnv 10.00 Mb Ok
Read [2/74] miscdata 1024.00 Kb Ok
Read [8/74] uboot_a 3.00 Mb Ok
Read [9/74] uboot_b 3.00 Mb Ok
Read [13/74] l_fixnv1_a 2.00 Mb Ok
Read [14/74] l_fixnv2_a 2.00 Mb Ok
Read [15/74] l_fixnv1_b 2.00 Mb Ok
Read [16/74] l_fixnv2_b 2.00 Mb Ok
Saved 8 of 8 images, 25.00 Mb of 25.00 Mb
Done 8 files
Compress: C:\InfinityBox\CM2SP3\backup\sp9863a_7b0e7cdaccad614b\
Cleanup...
Ok
Verify C:\InfinityBox\CM2SP3\backup\sp9863a_7b0e7cdaccad614b.7z Verified [def338f1]
get slots... slot: a
MemTool load 74 items
Finished 1 min 17 sec
Operation: Reset | Format KXD A07 Boot [FF] FireFly [v2.27]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[-] Wipe
[-] Userdata
[+] FRP
[+] Smart
Reset Userdata is Off
If FRP still active after reset make Userdata On and repeat operation
Wait...
Backup exist: C:\InfinityBox\CM2SP3\backup\sp9863a_7b0e7cdaccad614b\
Stage: FRP...
Looking for items... 1 items found
[1] Writing... Ok
Completed
Stage: Smart...
[17] Format... Ok
[18] Format... Ok
Completed
Finished 11 sec
Reboot... Disconnect cable if it freez
fault 0x05 0x8E | BSL_PHONE_WAIT_INPUT_TIMEOUT
Bye
