UMT [15-10-24] UMTv2/UMTPro QcFire v11.0 - Honor 50 Pro, S24 Ultra, ZFold 6 and more...

[SPYROS]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v11.0
The Ultimate Qualcomm Tool




Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices

Please login to view image

What's New:

Huawei
- Mate 50 Pro (DCO-AL00)
- Y Max (ARS-L22)

LG
- V60 ThinQ 5G (A001LG)

LePhone
- Le Pro3 (X727)

Samsung
- Galaxy A01 (SM-S111DL) BIT-E
- Galaxy A02s (SM-S124DL) BIT-B
- Galaxy A05s (SM-A057G) BIT-4
- Galaxy A05s (SM-A057M) BIT-5
- Galaxy A11 (SM-A115AP)
- Galaxy A11 (SM-A115AZ)
- Galaxy A23 (SM-A235M) BIT-1
- Galaxy A23 (SM-A235N) BIT-5
- Galaxy A42 5G (SM-A426U) BIT-9
- Galaxy A52s 5G (SM-A528B) BIT-8
- Galaxy A52s 5G (SM-A528B) BIT-9
- Galaxy A60 (SM-A6060) BIT-3
- Galaxy A71 (SM-A715F) BIT-B
- Galaxy A9 (2018) (SM-A920F) BIT-7
- Galaxy F02s (SM-E025F) BIT-6
- Galaxy F02s (SM-E025F) BIT-7
- Galaxy M11 (SM-M115F) BIT-5
- Galaxy M55 5G (SM-M556E) BIT-3
- Galaxy Note8 (SM-N9500) BIT-3
- Galaxy S10 5G (SM-G977U) BIT-B
- Galaxy S20 5G (SM-G981W) BIT-A
- Galaxy S20 FE 5G (SM-G780G) BIT-C
- Galaxy S20 FE 5G (SM-G781U) BIT-1
- Galaxy S20 FE 5G (SM-G781V) BIT-F
- Galaxy S22 5G (SM-S9010) BIT-7
- Galaxy S22 5G (SM-S901E) BIT-4
- Galaxy S22 Ultra (SM-S9080) BIT-7
- Galaxy S22+ 5G (SM-S9060) BIT-7
- Galaxy S23 Plus (SM-S9160) BIT-4
- Galaxy S24 Plus 5G (SM-S9260) BIT-3
- Galaxy S24 Ultra 5G (SM-S928N) BIT-3
- Galaxy S8 (SM-G950U) BIT-8
- Galaxy S9 (SM-G960U) BIT-9
- Galaxy Tab A 8.0 (2019) (SM-T290) BIT-5
- Galaxy Z Flip6 (SM-F741N) BIT-1
- Galaxy Z Fold 6 5G (SM-F9560) BIT-1
- Galaxy Z Fold6 (SM-F9560) BIT-1
- Galaxy Z Fold6 5G (SM-F9560) BIT-1

SUNMI
- P2 Pro

Vertu
- Aster P

Xiaomi
- MiPad 5 (nabu)


Updated Internal Database with new HWID and HASH









CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...





SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 9 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram


Br,
UMT

 

[sabir12]

A236E U6 U7 loader add

 

[asad10]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v11.0
The Ultimate Qualcomm Tool




Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices

Please login to view image

What's New:

Huawei
- Mate 50 Pro (DCO-AL00)
- Y Max (ARS-L22)

LG
- V60 ThinQ 5G (A001LG)

LePhone
- Le Pro3 (X727)

Samsung
- Galaxy A01 (SM-S111DL) BIT-E
- Galaxy A02s (SM-S124DL) BIT-B
- Galaxy A05s (SM-A057G) BIT-4
- Galaxy A05s (SM-A057M) BIT-5
- Galaxy A11 (SM-A115AP)
- Galaxy A11 (SM-A115AZ)
- Galaxy A23 (SM-A235M) BIT-1
- Galaxy A23 (SM-A235N) BIT-5
- Galaxy A42 5G (SM-A426U) BIT-9
- Galaxy A52s 5G (SM-A528B) BIT-8
- Galaxy A52s 5G (SM-A528B) BIT-9
- Galaxy A60 (SM-A6060) BIT-3
- Galaxy A71 (SM-A715F) BIT-B
- Galaxy A9 (2018) (SM-A920F) BIT-7
- Galaxy F02s (SM-E025F) BIT-6
- Galaxy F02s (SM-E025F) BIT-7
- Galaxy M11 (SM-M115F) BIT-5
- Galaxy M55 5G (SM-M556E) BIT-3
- Galaxy Note8 (SM-N9500) BIT-3
- Galaxy S10 5G (SM-G977U) BIT-B
- Galaxy S20 5G (SM-G981W) BIT-A
- Galaxy S20 FE 5G (SM-G780G) BIT-C
- Galaxy S20 FE 5G (SM-G781U) BIT-1
- Galaxy S20 FE 5G (SM-G781V) BIT-F
- Galaxy S22 5G (SM-S9010) BIT-7
- Galaxy S22 5G (SM-S901E) BIT-4
- Galaxy S22 Ultra (SM-S9080) BIT-7
- Galaxy S22+ 5G (SM-S9060) BIT-7
- Galaxy S23 Plus (SM-S9160) BIT-4
- Galaxy S24 Plus 5G (SM-S9260) BIT-3
- Galaxy S24 Ultra 5G (SM-S928N) BIT-3
- Galaxy S8 (SM-G950U) BIT-8
- Galaxy S9 (SM-G960U) BIT-9
- Galaxy Tab A 8.0 (2019) (SM-T290) BIT-5
- Galaxy Z Flip6 (SM-F741N) BIT-1
- Galaxy Z Fold 6 5G (SM-F9560) BIT-1
- Galaxy Z Fold6 (SM-F9560) BIT-1
- Galaxy Z Fold6 5G (SM-F9560) BIT-1

SUNMI
- P2 Pro

Vertu
- Aster P

Xiaomi
- MiPad 5 (nabu)


Updated Internal Database with new HWID and HASH









CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...





SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 9 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram


Br,
UMT

please add ops file to xml converter

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 79BE67459542FFE19394A64AA6A6F5FFBAE1A6B17D4E5DF43B 4D15C78E5FD9F5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_056]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [78]
Reading Device Information...OK
Software : SP1A.210812.016.E025FXXS6CXD1, E025FXXS6CXD1 [Tue Apr 2 19:00:48 KST 2024]
Android Ver. : 12
Patch Level : 2024-03-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Device : Honor X8B (LLY-LX3)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 0300A401
OPK_DATA : 489DD7DE2DB2MF5DBD1CDF927FM4B949A93388CEAEE92B8E80 5882C469B20EC7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_004]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 512 GB
LU Count : 6 [0x076E7800] [0x00000800] [0x00000800] [0x00000800] [0x00040800] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [124]
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Operation : Backup EFS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00007200
OPK_DATA : 4B60244704D727E5B96DD5BB7233886E38F2698FBDE6433FCE1D25A7B0472DD4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_001]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 256 GB
LU Count : 6 [0x03B11800] [0x00000800] [0x00000800] [0x00002000] [0x00080000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [102]
Reading Device Information...OK [Sign]
Saving EFS Backup.......OK
EFS Backup : EFS_SM6225_241024_133707.ueb
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Device : Xiaomi Redmi 9T
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B6WS44704D721E5B96DD5BBGKC3886E38F2198FBDE6433FCE 1D25A7B0472D4M
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20221205011709, V13.0.2.0.SJQMIXM [Mon Dec 5 01:23:38 CST 2022]
Android Ver. : 12
Patch Level : 2022-12-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Device : Samsung Galaxy S23 FE (SM-S711U) BIT1
Operation : Samsung Lost Mode Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-S711U BIT1.ufl]
Preparing Loader...Done
Sending Loader [SM-S711U BIT1]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 128 GB
LU Count : 6 [0x01DA0400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [86]
Reading Device Information...OK [Sign]
Build : S711WVLS1BWL2
Int. Build : SM-S711W_NA_XAC_QKWR0
Resetting Lost Mode... Done Done Done
Once phone reboot in Odin Mode, full flash your device.
If stuck on Charging Logo, hold VOL DOWN + PWR for 6 Seconds.
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

peration : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : curtana_global
Version : V13.0.2.0.SJSRNKMR
Code Base : 12
Serial : 0xab0bd477
Ext Info : US, es, F, 2, 2
Model : Redmi Note 9S
Reading Partition Table...[90] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 11.0

 

[yousafawan]

Pease Add EMMC Health Report In EDL Mode UMT Team

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : ZTE Diagnostics Interface (COM3)
Driver Info : ZTE Corporation, ZTEusbser6k.sys, 16.2129.0.4
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 3035F957678B713B1A1D9BFEF7951D87AC17 023EACA17B8E8E5EEEFBB349A61C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_021]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [50]
Reading Device Information...OK
Device : Lenovo 701LV [msm8953] [701LV]
Brand : Lenovo
Prod.Name : 701LV
Software : 701LV_S025_171215, 701LV_S025_171215 [Fri Dec 15 22:43:38 CST 2017]
Android Ver. : 7.1.1
Patch Level : 2017-12-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.0

 

[Fast Unlocking]

A236E U6 U7 loader add

Will be added in next update

 

[GsmToto]

Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 7E535102966019CE80C3E91F02E6F5FD40D FCF3AE3990B0BC51AC80885C6494F
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_074]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512


Writing [dynamic_nvbk.bin] -> [oppodycnvbk] ...Done
Writing [static_nvbk.bin] -> [oppostanvbk] ...Done
Writing [persist.img ] -> [persist]...Done
Writing [emmc_fw.bin] -> [opporeserve1] ...Done
Writing [opporeserve2.img ] -> [opporeserve2]...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
WARNING! File sec.dat is missing from program.
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [dtbo.img] -> [dtbo] ...Done
Writing [vbmeta.img] -> [vbmeta] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [logo.bin] -> [LOGO] ...Done
Writing [DRIVER.ISO] -> [DRIVER] ...Done
Writing [cache.img ] -> [cache]...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [lksecapp.mbn] -> [lksecapp] ...Done
Writing [cmnlib_30.mbn] -> [cmnlib] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64] ...Done
Writing [keymaster64.mbn] -> [keymaster] ...Done
Writing [lksecapp.mbn] -> [lksecappbak] ...Done
Writing [cmnlib_30.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster64.mbn] -> [keymasterbak] ...Done
Writing [dpAP.mbn] -> [apdp] ...Done
Writing [system.img ] -> [system]...Done
Writing [vendor.img ] -> [vendor]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Resetting device...Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Device : Samsung Galaxy A11 (SM-A115M) BIT5
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 58C5414A3A35B2E6DA247411000F7E9422 1BF5F13119812CAA9C7A3B816E594D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_054]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [78]
Reading Device Information...OK
Software : SP1A.210812.016.A115MUB15CWK2, A115MUBS5CWK2 [Sat Nov 25 09:21:16 KST 2023]
Android Ver. : 12
Patch Level : 2023-11-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Device : Samsung Galaxy A11 (SM-A115M) BIT5
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 58C5414A3A35B2E6A247411000F7E9422 1BF5F13119812CDAA9C7A3B816E594D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_054]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [78]
Reading Device Information...OK
Software : SP1A.210812.016.A115MUBS5CWK2, A115MUBS5CWK2 [Sat Nov 25 09:21:16 KST 2023]
Android Ver. : 12
Patch Level : 2023-11-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 11.0

 

[GsmToto]

Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DF8292DDD37993 0D5891E3D8240BCD85DF7E4AD067164D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [60]
Reading Device Information...OK
Device : [daisy_sprout]
Software : QKQ1.191002.002.V11.0.20.0.QDLMIXM, V11.0.20.0.QDLMIXM [Wed Jun 2 13:18:58 WIB 2021]
Android Ver. : 10
Patch Level : 2021-06-01
Writing [sec.dat] -> [sec] ...Done
Writing [lksecapp.img] -> [lksecapp] ...Done
Writing [lksecapp.img] -> [lksecappbak] ...Done
Writing [devcfg.img] -> [devcfg_a] ...Done
Writing [devcfg.img] -> [devcfg_b] ...Done
Writing [dummy.img] -> [apdp] ...Done
Writing [dummy.img] -> [msadp] ...Done
Writing [sbl1.img] -> [sbl1_a] ...Done
Writing [sbl1.img] -> [sbl1_b] ...Done
Writing [rpm.img] -> [rpm_a] ...Done
Writing [rpm.img] -> [rpm_b] ...Done
Writing [cmnlib.img] -> [cmnlib_a] ...Done
Writing [cmnlib.img] -> [cmnlib_b] ...Done
Writing [cmnlib64.img] -> [cmnlib64_a] ...Done
Writing [cmnlib64.img] -> [cmnlib64_b] ...Done
Writing [keymaster.img] -> [keymaster_a] ...Done
Writing [keymaster.img] -> [keymaster_b] ...Done
Writing [misc.img] -> [misc] ...Done
Writing [emmc_appsboot.mbn] -> [aboot_a] ...Done
Writing [emmc_appsboot.mbn] -> [aboot_b] ...Done
Writing [tz.img] -> [tz_a] ...Done
Writing [tz.img] -> [tz_b] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [dsp.img] -> [dsp_a] ...Done
Writing [dsp.img] -> [dsp_b] ...Done
Writing [mdtp.img] -> [mdtp_a] ...Done
Writing [mdtp.img] -> [mdtp_b] ...Done
Writing [persist.img] -> [persist] ...Done
Writing [boot.img] -> [boot_a] ...Done
Writing [boot.img] -> [boot_b] ...Done
Writing [modem.img] -> [modem_a] ...Done
Writing [modem.img] -> [modem_b] ...Done
Writing [system.img ] -> [system_a]...Done
Writing [system.img ] -> [system_b]...Done
Writing [vendor.img ] -> [vendor_a]...Done
Writing [vendor.img ] -> [vendor_b]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK [60]
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 11.0

 

[bronce]

Operation : Reset Mi Account (Sideload)
Searching for phone in sideload mode...Found
Device Id : lisa
Version : V13.0.8.0.SKOMIXM
Code Base : 12
Serial : 0x3079b34a
Ext Info : GB, en, F, 2, 2
Model : 2109119DG
Reading Partition Table...Failed
Unsupported Device/Firmware/Security.
Operation Failed.
QcFire Ver. 11.0

 

[andarbekbarsukov]

With tools like UMT Pro, even complex Qualcomm device repairs are becoming easier, but ensuring High Value NFT Intellectual Property Uk protection in the tech world remains a challenge.