UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

[SPYROS]

Post All Successfully Repaired Phones by Ultimate Multi Tool

Everybody can post here there successful posts by texts or by screen short of any phone done by UMT for users help and product feedback.

 

[SPYROS]

Device : Samsung Galaxy A52 (SM-A525F) BIT6
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00002000
OPK_DATA : 36E60270BD33E7290B16C4236EC83747 F7AE14535FB63EEA2DE1D42607BFE83C
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525F BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525F BIT6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01DA3400] [0x00000800] [0x00000800] [0x00000400] [0x00025800] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [76]
Reading Device Information...OK
Software : TP1A.220624.014.A525FXXS6JY4MCC, A525FXXS6DWK2 [Wed Nov 29 15:59:32 KST 2023]
Android Ver. : 13
Patch Level : 2023-12-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 10.6

 

[SPYROS]

Device : Honor X8B (LLY-LX3)
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 0300A693
OPK_DATA : 489DD7DE2DB2E92B0E80 5882C469B20EC36F5DBD1CDF921F54B949A93388CEAE
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_004]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 256 GB
LU Count : 6 [0x03B51800] [0x00000800] [0x00000800] [0x00000800] [0x00040800] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [124]
Reading Device Information...OK [Sign]
Build :86fGF398
Int. Build :GGD4JM962F39N76
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 10.6

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B518EC68BE59F6F7B1D45CB656BC83AB
SoC ID[0] : A8C9D4E0AB2E2A789E381EBF399D4A09
SoC ID[1] : C5DDFFB28F9AF7D86541652DB1835B8F
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_kg7_h6913.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 1501004456368CF0078853644414202C [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DAB
CID : 1501004456368CF0078853644414202C
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1EC00000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Tue Oct 10 12:12:55 CST 2023
Display ID : TECNO-R-64-231010V223
Ver. Inc. : 231010V543
Locale : en-US
Patch : 2023-10-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20678522_177924.log

 

[GsmToto]

[*]==> Operation : RAMDISK-ERASE[*]==> Reading Device Infos [ DFU Mode ]
CPID : 0X8015
ECID : 0X00162DC02EDC380B
PWND: CHECKM8
MODE: DFU
PRODUCT : iPhone10,6
MODEL : d221ap[*]==> Device : iPhoneX(iPhone10,6 d221ap)[*]==> Device is in PWNDFU Mode: CHECKM8[*]==> Preparing DATA.....
Will use: RAMDISK_6_iPhone10,6-d221ap-16.zip
Downloading ramdisk, wait....
Processing ramdisk, wait....
Ramdisk Name: iPhone10,6 d221ap[*]==> Sending iBoot... Fail
==> Sending Boot Stage 1 <== OK
==> Sending Boot Stage 2 <== OK
==> Sending Boot Stage 3 <== OK
==> Executing boot
==> Setting Boot Args
Wait untill phone will reboot and finish erase.
If phone reboot without erase, phone not accept ramdisk file or wrong pwn.
Exe version: UMT iOS Ramdisk Activator V4.2

 

[GsmToto]

Operation : Wipe EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600E00 [SM7150] 00007200
OPK_DATA : 4B60244704D72210472DD71E5B96DD5BB7233886E38F98FBDE6433FCE1D25A7B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM7150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Init EDL Auth...OK
Detecting Storage Type...OK
Hardware : SM7150, UFS, 64 GB
LU Count : 6 [0x00DD4800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [80]
Reading Device Information...OK
Device : Xiaomi
Software : , V14.0.2.0.SJGMIXM [Mon Jun 12 20:45:35 CST 2023]
Android Ver. : 12
Patch Level : 2023-06-01
Saving EFS Backup.......OK
EFS Backup : EFS_Xiaomi_2023-06-01_240826_114856.ueb
Reset EFS (Full).......Done
Operation Finished.
QcFire Ver. 10.6

 

[GsmToto]

Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM3 : SAMSUNG Mobile USB Modem #23
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A325F
IMEI: : 356807531468992232455
Software: : A325FXXS3VT85H/A325FOJGUB73V/A325FXXS3G8L5/A325FXXS6FKI3
Product : PKD
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM33 : SAMSUNG Mobile USB Modem #5
Reading Data from Phone...Done
Chipset : MTK6769T [HiSpeed]
Closing Session...Done
Port: : COM33 : SAMSUNG Mobile USB Modem #5
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:58
[UltimateSams v0.7]

 

[GsmToto]

Phone Storage: EMMC
Job: Remove FRP
SELECTED: Autodetect by loader
ACTION: Erase FRP
Loader format:NEW
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM3)
Sending loader, keep boot key untill loader start.
Loader send OK
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
CPU NAME:
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_65.txt
Total Time: 00:01:597
Done.

 

[GsmToto]

Device : Samsung Galaxy A52 (SM-A525M) BIT6
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00002000
OPK_DATA : 58F6B27795E738C1333136F84F 23C171EB694BB67658FF2894F7D445E023070C
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525M_BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525M_BIT6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01DA3400] [0x00000800] [0x00000800] [0x00000400] [0x00025800] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [76]
Reading Device Information...OK
Software : TP1A.220624.014.A525MUBS9SJHT3, A525MUBS9SJHT3 [Thu Oct 5 22:11:29 KST 2023]
Android Ver. : 13
Patch Level : 2023-10-01
Resetting FRP Lock...Done
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 10.7

 

[GsmToto]

ob: Remove FRP
SELECTED: SC9832E
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM58)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 742902 [5e] 41B5010
UID: M2T223_13_32_16
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9832E
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_erase_frp_99.txt
Total Time: 00:00:37
Done.

 

[GsmToto]

Job: Safe Format Userdata
SELECTED: Tiger T606 Ver2
ACTION: Wipe Userdata(misc)
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 743941 [5e] 100E031S
UID: M3U181_24_6_27
FileSystem: EMMC
Read partition info is supported by loader.
[misc]Formating userdata, wait...
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\_format_userdata_misc.txt
Total Time: 00:00:48
Done.

 

[GsmToto]

ob: Remove FRP
SELECTED: SM-A032F
ACTION: Erase FRP
Start Detect phone.
Testpoint image link for this model is located in utils tab
Phone must be off(you can service this phone without battery also).
Connect Testpoint while inserting usb cable.
After booting, testpoint can be removed.
Detected: SCI USB2Serial (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 1221480C [5e] 91BA24
UID: TKXT94_5_16_12
FileSystem: EMMC
Read partition info is supported by loader.
***************
Manufacturer: samsung
Brand: samsung
Device: a3core
Model: SM-A032F
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3corexx-user 11 RP1A.201005.001 A032FXXU2AVH4 release-keys
Build Id: RP1A.201005.001
Android Release: 11
Android Version: RP1A.201005.001.A032FXXU2AJN8
Security patch: 2022-07-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_fold er\Saved_Logs\samsung_RP1A_201005_001_A032FXXU2AVH 4_erase_frp.txt
Total Time: 00:00:48
Done.

 

[bronce]

Vivo Y12s Frp Lock Remove UMTMTK Tool​

USING PL_EXLOIT [VIVO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM13)
Device Path : \\?\usb#vid_0e8d&pid_2000#7&1014e877&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : EA08D1E9214A2406D03A74F18CAF4751
SoC ID[0] : F78F71F6F8D35A282AB2A94817DFE53C
SoC ID[1] : 1B61E4786CC37711175B716460B721EC
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E03009ACF53A705
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Prod. Ver. : PD2036F_EX_A_6.16.15
Hw. Ver. : PD2036F_EXMA
Build Dt. : Mon Apr 8 15:42:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20240408.154559
Locale : en-US
Patch : 2023-05-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240831_173126.log

 

[Hi-Tech ™]

Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM48 : SAMSUNG Mobile USB Modem #10
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A105M
IMEI: : 3556XXXXXXXXXXX
Software: : A105MUBU8CWE1/A105MOWO8CWE1/A105MUBU8CWE1/A105MUBU8CWE1
Product : TPA
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A105M
Product : a10
Device : a10
Andriod Ver. : 11
Patch Level : 2023-05-01
PDA : A105MUBU8CWE1
Bootloader : A105MUBU8CWE0
Build ID : RP1A.200720.011.A105MUBU8CWE1
Build Date : Sat May 20 06:17:16 KST 2023
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 07:50
[UltimateSams v0.7]
Saved to Logs\240889_160756.log

 

[GsmToto]

Operation : Reset FRP
Searching for COM1.0 Device...Found!
COM46 : HUAWEI USB COM 1.0 (COM3)
Opening Port...OK
Platform : Kirin_710 _UFS
Sending Loader...[1]..[2]..[3]..Done
Reading Partition Table...Done
Erasing FRP Data...Done
Hold power button to reboot device.
Operation Finished.
UltimateHST v0.2

 

[Fast Unlocking]

Huawei Y9S Frp done

Operation    : Reset FRP
Searching for COM1.0 Device...Found!
COM46    : HUAWEI USB COM 1.0 (COM46)
Opening Port...OK
Platform    : Kirin_710 _UFS
Sending Loader...[1]..[2]..[3]..Done
Reading Partition Table...Done
Erasing FRP Data...Done
Hold power button to reboot device.
Operation Finished.
UltimateHST v0.2

 

[Fast Unlocking]

Redmi 4x reset frp with umt dongle....

---

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM123)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [49]
Reading Device Information...OK
Device : Xiaomi Redmi 4X [msm8937] [santoni]
Brand : Xiaomi
Prod.Name : santoni
Software : N2G47H, V11.0.2.0.NAMMIXM [Thu Nov 7 22:22:13 WIB 2019]
Android Ver. : 7.1.2
Patch Level : 2018-10-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 10.7

 

[GsmToto]

Operation : Full Reset EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 9CBA94693C2333A56002F543B2A2 6AB1B4B3F1CF9E2BCF0E0E981C558748817D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_065]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [47]
Reading Device Information...OK
Device : Reliance RC555L [msm8937] [RC555L]
Brand : Orbic
Prod.Name : VZW_RC555L
Software : ORB555L_V1.1.1_BVZPP, 765b472 [2020年 12月 29日 星期二 19:32:43 CST]
Android Ver. : 7.1.2
Patch Level : 2020-01-01
Saving EFS Backup.......OK
EFS Backup : EFS_Reliance_RC555L_ORB555L_V1.1.1_BVZPP_2020-01-01_240831_103104.ueb
Reset EFS (Full).......Done
Operation Finished.
QcFire Ver. 10.7

 

[GsmToto]

USING PL_EXLOIT [VIVO V1]
Brand/Model : Auto / Auto Detect
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM39)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&323149bf&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 9119FCBF0AB0B8D9241E2C54C65D211F
SoC ID[0] : 1EE1B27891E5E8D704C88833298ADC39
SoC ID[1] : D38CA0BB7F61E20658453CE82EFAC7FC
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC9aP3
CID : 90014A684339615033012041F532C6E5
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Mon May 13 16:07:43 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20240513.161046
Locale : en-US
Patch : 2022-05-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240827_140808.log
USING PL_EXLOIT [VIVO V1]
Brand/Model : Auto / Auto Detect
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM39)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&323149bf&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 9119FCBF0AB0B8D9241E2C54C65D211F
SoC ID[0] : 1EE1B27891E5E8D704C88833298ADC39
SoC ID[1] : D38CA0BB7F61E20658453CE82EFAC7FC
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC9aP3
CID : 90014A684339615033012041F532C6E5
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Mon May 13 16:07:43 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20240513.161046
Locale : en-US
Patch : 2022-05-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.4]
Log Saved : 20240827_140808.log

 

[moon955]

umt team plz update ios tool