Help Need Realme C3 (RMX2020/RMX2027) ISP Pinout

[JUMMAN784695]

RMX2020/RMX2027 Realme C3 isp pinout share anyone pls....

 

[umairji]

i also need rmx 2020 please help isp please

 

[SHOEB AHMED]

Model RMX2063, RMX2040, RMX2020, RMX2001

UFS Chip Not Avilable Isp

Go To Primium Market Section

Flash online Service...

 

[rajeshda69]

Model RMX2063, RMX2040, RMX2020, RMX2001

UFS Chip Not Avilable Isp

Go To Primium Market Section

Flash online Service...

its emmc

eMMC 5.1

 

[meet39]

rmx2027 isp

 

[rajesh_jakhal]

Please martview-forum team provide Realme C3 (RMX2027) ISP Pinouts.
Its very urgent friends....
Regards,
Rajesh Jakhal

 

[GSMRAJESH]

Please martview-forum team provide Realme C3 (RMX2027) ISP Pinouts.
Its very urgent friends....
Regards,
Rajesh Jakhal

 

[Suryakant]

realme 2027 isp

 

[rajesh_jakhal]

Please martview-forum team provide Realme C3 (RMX2027) ISP Pinouts.
Its very urgent friends....
Regards,
Rajesh Jakhal

Finally I get the required ISP for Realme C3 (RMX2027) and its tested by me as attached.

 

[cheong966]

Picture show logo with other Tools, is it can bypass with UFI box ?
Or only bypass with picture logo TOOL ?

 

[yaseen khan]

Finally I get the required ISP for Realme C3 (RMX2027) and its tested by me as attached.
View attachment 14169

Hlo Freiemd If U Have ExtCsd file plz Share My Handset Is Dead Now After Unlock With UFI

 

[Maikyr.raj]

Finally I get the required ISP for Realme C3 (RMX2027) and its tested by me as attached.

View attachment 14169

It's not working

 

[JUMMAN784695]

Realme C3 Unlock Success Full Repport :-

ISP Pinout :-

Please login to view image

Please login to view image

Please login to view image

 

[Rahulsgsm]

Realme C3 Unlock Success Full Repport :-

ISP Pinout :-

View attachment 15011

View attachment 15012

View attachment 15013

Realme C3 (rmx 2027) password lock. isp jumpering after dead
Mobile not detected ufi box.
Any solution ?

 

[JUMMAN784695]

Realme C3 (rmx 2027) password lock. isp jumpering after dead
Mobile not detected ufi box.
Any solution ?

Pls share log and screen shoots

 

[manish_patan]

rmx2027 ka tested isp pinopt kua gai

VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

 

[JUMMAN784695]

rmx2027 ka tested isp pinopt kua gai

VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---

Check ISP connection and change jumper ware

 

[aravind4u49]

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-6628
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DD68MB (0x444436384d42), rev: 0x02, serial number: 0x1AE7A82D
Manufacturing date: Jun 2019
CID: 15010044 4436384D 42021AE7 A82D66F4
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Internal storage: 20.59 GiB
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMDD60008M-BXXX/32G


rmx 2020 dead please help me....................................

 

[JUMMAN784695]

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-6628
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DD68MB (0x444436384d42), rev: 0x02, serial number: 0x1AE7A82D
Manufacturing date: Jun 2019
CID: 15010044 4436384D 42021AE7 A82D66F4
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Internal storage: 20.59 GiB
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMDD60008M-BXXX/32G


rmx 2020 dead please help me....................................

Partition configuration: 0x00
Pls write partition configuration

 

[duckzter]

i have same problem rmx2020 deadboot