UMT [07-09-24] UMTv2/UMTPro UltimateMTK2 v1.5 - Infinix 2024 Preloader Exploit and more..

[SPYROS]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.5
The Ultimate MediaTek Tool

What's New:

Added Infinix/Itel/Tecno V4 (2024) Preloader Exploit
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6833
- MT6891/MT6893
- Read/Write Firmware/Format FS/FRP


Following Models should be working:
- Infinix GT 10 Pro (X6739)
- Infinix Hot 10i (X658B)
- Infinix Hot 20 5G (X666C)
- Infinix Hot 20 Play (X6825)
- Infinix Hot 20i (X665E)
- Infinix Hot 30 (X6831)
- Infinix Hot 30 5G (X6832)
- Infinix Hot 30 Play NFC (X6835B, X6835)
- Infinix Hot 40 (X6836)
- Infinix Note 11 (X662, X662B, X662F)
- Infinix Note 11 Pro (X697)
- Infinix Note 11i (X663, X663B, X663C)
- Infinix Note 11s (X689)
- Infinix Note 11 (X689F)
- Infinix Note 12 (X6817)
- Infinix Note 12 5G (X671)
- Infinix Note 12 Pro 5G (X671B)
- Infinix Note 12i (X6819)
- Infinix Note 30 5G (X6711)
- Infinix Note 30 VIP (X6710)
- Infinix Note 30i (X6716B)
- Infinix Zero 30 (X6731)
- Tecno Camon 12 (CC7)
- Tecno Camon 12 Air (CC6)
- Tecno Camon 12 Pro (CC9)
- Tecno Camon 15 (CD7)
- Tecno Camon 15 Air (CD6)
- Tecno Camon 15 Premier (CD8j)
- Tecno Camon 15 Pro (CD8)
- Tecno Camon 16 (CE7, CE9H)
- Tecno Camon 16 Pro (CE8)
- Tecno Camon 16 SE (CE7J)
- Tecno Camon 17 (CG6, CG6J)
- Tecno Camon 17P (CG7, CG7N)
- Tecno Camon 18 (CH6, CH6N)
- Tecno Camon 18T (CH6T)
- Tecno Camon 18T (CH6T)
- Tecno Camon 19 (CI6, CI6H)
- Tecno Camon 19 Neo (CH6I)
- Tecno Camon 19 Pro 5G CI7n)
- Tecno Camon 20 (CK6)
- Tecno Camon 20 Premier (CK9n)
- Tecno Camon 20 Pro 5G (CK8n)
- Tecno Camon 20s Pro 5G (CK8nB)
- Tecno Camon 11S (CB7)
- Tecno Phantom V Flip (AD11)
- Tecno Pova 2 (LE7)
- Tecno Pova 5 Pro (LH8n)
- Tecno Pova 6 Pro (LI9)
- Tecno Pova Neo 2 (LG6N)
- Tecno Pova Neo 3 (LH6n, LH6)
- Tecno Spark 10 (KI5N)
- Tecno Spark 10 5G (KI8)
- Tecno Spark 10 Pro (KI7)
- Tecno Spark 20 (KJ5)
- Tecno Spark 20C (BG7n)
- Tecno Spark 8 Pro (KG8)
- Tecno Spark Go 2023 (BF7)
- Tecno Spark Power 2 (LC8)


Added Set Active Slot Option
- You can use this function if phone stuck in Fastboot after flash

Fixed "No HWID Found" Issue in DA Selection

Improved Booting Process

Some Minor Improvements




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[jakeka]

thx team .... finally

 

[tsui_thomas]

nice work UMT Team keep it up

 

[dany_boy]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.5
The Ultimate MediaTek Tool

What's New:

Added Infinix/Itel/Tecno V4 (2024) Preloader Exploit
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6833
- MT6891/MT6893
- Read/Write Firmware/Format FS/FRP


Following Models should be working:
- Infinix GT 10 Pro (X6739)
- Infinix Hot 10i (X658B)
- Infinix Hot 20 5G (X666C)
- Infinix Hot 20 Play (X6825)
- Infinix Hot 20i (X665E)
- Infinix Hot 30 (X6831)
- Infinix Hot 30 5G (X6832)
- Infinix Hot 30 Play NFC (X6835B, X6835)
- Infinix Hot 40 (X6836)
- Infinix Note 11 (X662, X662B, X662F)
- Infinix Note 11 Pro (X697)
- Infinix Note 11i (X663, X663B, X663C)
- Infinix Note 11s (X689)
- Infinix Note 11 (X689F)
- Infinix Note 12 (X6817)
- Infinix Note 12 5G (X671)
- Infinix Note 12 Pro 5G (X671B)
- Infinix Note 12i (X6819)
- Infinix Note 30 5G (X6711)
- Infinix Note 30 VIP (X6710)
- Infinix Note 30i (X6716B)
- Infinix Zero 30 (X6731)
- Tecno Camon 12 (CC7)
- Tecno Camon 12 Air (CC6)
- Tecno Camon 12 Pro (CC9)
- Tecno Camon 15 (CD7)
- Tecno Camon 15 Air (CD6)
- Tecno Camon 15 Premier (CD8j)
- Tecno Camon 15 Pro (CD8)
- Tecno Camon 16 (CE7, CE9H)
- Tecno Camon 16 Pro (CE8)
- Tecno Camon 16 SE (CE7J)
- Tecno Camon 17 (CG6, CG6J)
- Tecno Camon 17P (CG7, CG7N)
- Tecno Camon 18 (CH6, CH6N)
- Tecno Camon 18T (CH6T)
- Tecno Camon 18T (CH6T)
- Tecno Camon 19 (CI6, CI6H)
- Tecno Camon 19 Neo (CH6I)
- Tecno Camon 19 Pro 5G CI7n)
- Tecno Camon 20 (CK6)
- Tecno Camon 20 Premier (CK9n)
- Tecno Camon 20 Pro 5G (CK8n)
- Tecno Camon 20s Pro 5G (CK8nB)
- Tecno Camon 11S (CB7)
- Tecno Phantom V Flip (AD11)
- Tecno Pova 2 (LE7)
- Tecno Pova 5 Pro (LH8n)
- Tecno Pova 6 Pro (LI9)
- Tecno Pova Neo 2 (LG6N)
- Tecno Pova Neo 3 (LH6n, LH6)
- Tecno Spark 10 (KI5N)
- Tecno Spark 10 5G (KI8)
- Tecno Spark 10 Pro (KI7)
- Tecno Spark 20 (KJ5)
- Tecno Spark 20C (BG7n)
- Tecno Spark 8 Pro (KG8)
- Tecno Spark Go 2023 (BF7)
- Tecno Spark Power 2 (LC8)


Added Set Active Slot Option
- You can use this function if phone stuck in Fastboot after flash

Fixed "No HWID Found" Issue in DA Selection

Improved Booting Process

Some Minor Improvements




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

Thanks for good update . But what about vivo 2024 security patch solution in preloader mode

 

[Ahsan Communication]

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM17)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&168efb2c&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : BD1DB9B3EF648214114ABFD1D35554C4
SoC ID[0] : 343FD56BA36F2DEF72B40F4A6EEA9242
SoC ID[1] : 8F2034FDEB414279C31502056B6F9F87
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x000000000003A600 [233.50 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : ARV11X
CID : F401224152563131581332BB8E33B9AF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E90000000 [58.25 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Connected to High-Speed DA Port
Reading Partition Table...OK
And. Ver. : 12
Build Dt. : Thu May 9 18:15:45 CST 2024
Display ID : INFINIX-S-64-240509V40
Ver. Inc. : 240509V1495
Locale : en-US
Patch : 2024-05-05
Bootloader : LOCKED
Executing Safe Format...Failed!
Resetting FRP...GET_PACKET_LEN Error!Failed!
Operation Finished.
[UltimateMTK2 v1.5]

 

[bronce]

BOOM..Tecno Spark Go 2023 (BF7)
..error in unlocktool done in umt. :D

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM17)
Device Path : \\?\usb#vid_0e8d&pid_2000#7&1014e877&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 696EB9463A1A3227C0008E515A4B2038
SoC ID[0] : 616CBA13347B3425C662FDCBA0472F7F
SoC ID[1] : FDEAE0900ED234D1A99109E51FF88BA2
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x000000000003A600 [233.50 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : ARV11X
CID : F4012241525631315813401891C71A7D
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E90000000 [58.25 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 12
Build Dt. : Wed Jul 3 13:01:18 CST 2024
Display ID : TECNO-S-64-240703V1695
Ver. Inc. : 240703V2315
Locale : en-US
Patch : 2024-06-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20240907_142227.log

 

[Ehtasham]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.5
The Ultimate MediaTek Tool

Please login to view image

What's New:

Added Infinix/Itel/Tecno V4 (2024) Preloader Exploit
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6833
- MT6891/MT6893
- Read/Write Firmware/Format FS/FRP


Following Models should be working:
- Infinix GT 10 Pro (X6739)
- Infinix Hot 10i (X658B)
- Infinix Hot 20 5G (X666C)
- Infinix Hot 20 Play (X6825)
- Infinix Hot 20i (X665E)
- Infinix Hot 30 (X6831)
- Infinix Hot 30 5G (X6832)
- Infinix Hot 30 Play NFC (X6835B, X6835)
- Infinix Hot 40 (X6836)
- Infinix Note 11 (X662, X662B, X662F)
- Infinix Note 11 Pro (X697)
- Infinix Note 11i (X663, X663B, X663C)
- Infinix Note 11s (X689)
- Infinix Note 11 (X689F)
- Infinix Note 12 (X6817)
- Infinix Note 12 5G (X671)
- Infinix Note 12 Pro 5G (X671B)
- Infinix Note 12i (X6819)
- Infinix Note 30 5G (X6711)
- Infinix Note 30 VIP (X6710)
- Infinix Note 30i (X6716B)
- Infinix Zero 30 (X6731)
- Tecno Camon 12 (CC7)
- Tecno Camon 12 Air (CC6)
- Tecno Camon 12 Pro (CC9)
- Tecno Camon 15 (CD7)
- Tecno Camon 15 Air (CD6)
- Tecno Camon 15 Premier (CD8j)
- Tecno Camon 15 Pro (CD8)
- Tecno Camon 16 (CE7, CE9H)
- Tecno Camon 16 Pro (CE8)
- Tecno Camon 16 SE (CE7J)
- Tecno Camon 17 (CG6, CG6J)
- Tecno Camon 17P (CG7, CG7N)
- Tecno Camon 18 (CH6, CH6N)
- Tecno Camon 18T (CH6T)
- Tecno Camon 18T (CH6T)
- Tecno Camon 19 (CI6, CI6H)
- Tecno Camon 19 Neo (CH6I)
- Tecno Camon 19 Pro 5G CI7n)
- Tecno Camon 20 (CK6)
- Tecno Camon 20 Premier (CK9n)
- Tecno Camon 20 Pro 5G (CK8n)
- Tecno Camon 20s Pro 5G (CK8nB)
- Tecno Camon 11S (CB7)
- Tecno Phantom V Flip (AD11)
- Tecno Pova 2 (LE7)
- Tecno Pova 5 Pro (LH8n)
- Tecno Pova 6 Pro (LI9)
- Tecno Pova Neo 2 (LG6N)
- Tecno Pova Neo 3 (LH6n, LH6)
- Tecno Spark 10 (KI5N)
- Tecno Spark 10 5G (KI8)
- Tecno Spark 10 Pro (KI7)
- Tecno Spark 20 (KJ5)
- Tecno Spark 20C (BG7n)
- Tecno Spark 8 Pro (KG8)
- Tecno Spark Go 2023 (BF7)
- Tecno Spark Power 2 (LC8)


Added Set Active Slot Option
- You can use this function if phone stuck in Fastboot after flash

Fixed "No HWID Found" Issue in DA Selection

Improved Booting Process

Some Minor Improvements




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

We need update for Vivo 2024 mtk security

 

[Shivani Mobile]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.5
The Ultimate MediaTek Tool

Please login to view image

What's New:

Added Infinix/Itel/Tecno V4 (2024) Preloader Exploit
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6833
- MT6891/MT6893
- Read/Write Firmware/Format FS/FRP


Following Models should be working:
- Infinix GT 10 Pro (X6739)
- Infinix Hot 10i (X658B)
- Infinix Hot 20 5G (X666C)
- Infinix Hot 20 Play (X6825)
- Infinix Hot 20i (X665E)
- Infinix Hot 30 (X6831)
- Infinix Hot 30 5G (X6832)
- Infinix Hot 30 Play NFC (X6835B, X6835)
- Infinix Hot 40 (X6836)
- Infinix Note 11 (X662, X662B, X662F)
- Infinix Note 11 Pro (X697)
- Infinix Note 11i (X663, X663B, X663C)
- Infinix Note 11s (X689)
- Infinix Note 11 (X689F)
- Infinix Note 12 (X6817)
- Infinix Note 12 5G (X671)
- Infinix Note 12 Pro 5G (X671B)
- Infinix Note 12i (X6819)
- Infinix Note 30 5G (X6711)
- Infinix Note 30 VIP (X6710)
- Infinix Note 30i (X6716B)
- Infinix Zero 30 (X6731)
- Tecno Camon 12 (CC7)
- Tecno Camon 12 Air (CC6)
- Tecno Camon 12 Pro (CC9)
- Tecno Camon 15 (CD7)
- Tecno Camon 15 Air (CD6)
- Tecno Camon 15 Premier (CD8j)
- Tecno Camon 15 Pro (CD8)
- Tecno Camon 16 (CE7, CE9H)
- Tecno Camon 16 Pro (CE8)
- Tecno Camon 16 SE (CE7J)
- Tecno Camon 17 (CG6, CG6J)
- Tecno Camon 17P (CG7, CG7N)
- Tecno Camon 18 (CH6, CH6N)
- Tecno Camon 18T (CH6T)
- Tecno Camon 18T (CH6T)
- Tecno Camon 19 (CI6, CI6H)
- Tecno Camon 19 Neo (CH6I)
- Tecno Camon 19 Pro 5G CI7n)
- Tecno Camon 20 (CK6)
- Tecno Camon 20 Premier (CK9n)
- Tecno Camon 20 Pro 5G (CK8n)
- Tecno Camon 20s Pro 5G (CK8nB)
- Tecno Camon 11S (CB7)
- Tecno Phantom V Flip (AD11)
- Tecno Pova 2 (LE7)
- Tecno Pova 5 Pro (LH8n)
- Tecno Pova 6 Pro (LI9)
- Tecno Pova Neo 2 (LG6N)
- Tecno Pova Neo 3 (LH6n, LH6)
- Tecno Spark 10 (KI5N)
- Tecno Spark 10 5G (KI8)
- Tecno Spark 10 Pro (KI7)
- Tecno Spark 20 (KJ5)
- Tecno Spark 20C (BG7n)
- Tecno Spark 8 Pro (KG8)
- Tecno Spark Go 2023 (BF7)
- Tecno Spark Power 2 (LC8)


Added Set Active Slot Option
- You can use this function if phone stuck in Fastboot after flash

Fixed "No HWID Found" Issue in DA Selection

Improved Booting Process

Some Minor Improvements




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro

 

[Shivani Mobile]

Great Update From Great Team

 

[GsmToto]

USING PL_EXPLOIT [XIAOMI AUTH]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
DL AGENT : DA_gale_V14.0.5.bin
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM2)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&151fc306&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 10E5E6E7FC3F9F445853F008E752447E
SoC ID[0] : F773943DF06E8E6C2E4F91985D7735AE
SoC ID[1] : E2B714B48D698E714149A6F1666CAF8C
DA : DA_gale_V14.0.5.bin
DA_INFO : MTK_AllInOne_DA_v5.5001.2023-11-15.20:17_10/19/2023_626809
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : MMC128
CID : D62D004D4D433132385114FD6797GE53SN
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001D1EC00000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Connected to High-Speed DA Port
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 202864211_148633log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&2e7d5367&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f66}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 9B14BF382FCBD04EE9F1AFFA0376346D
SoC ID[0] : 6307F2F13A8324C1667109229B90B16A
SoC ID[1] : 6440C0812FD3D9DCD9012EFE596F0F5A
Running Exploit... Installing Filter... OK Done
Downloading Preloader...OK
Saved as : preloader_akita_row_wifi.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 1501005120364A6BA0CC7F7583633414 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : QX63AB
CID : 1501005158363341420364A6BA0CC7F7
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 10
Build Dt. : Sat Mar 19 09:57:58 CST 2022
Display ID : TB-8505F_S300525_220319_BMP
Ver. Inc. : TB-8505F_USR_S300525_2203190837_V9.56_BMP_ROW
Patch : 2022-03-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20142036_190837.log

 

[RomanKo]

Please add Redmi note 13 pro plus (Zircon)

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{f9f3ff14-ae21-48a0-8a25-8011a7a931d2}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 9BFB23F87E4C7B3B7E8E20701D16371A
SoC ID[0] : A7D9754D3EA4EB84823E7FF31675E57A
SoC ID[1] : 1237D7527EAAEC10A09E41ADA6CAE19E
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ke5k_h6122.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 1501004450364441420249A0CAF8A877 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DP6DAB
CID : 1501004450364441420249A0CAF8A877
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 10
Build Dt. : Thu Jun 16 20:01:51 CST 2022
Display ID : KE5k-H6122CD-Q-OP-220616V221
Ver. Inc. : CD-OP-220616V221
Locale : en-US
Patch : 2022-06-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20678433_184450.log

 

[bronce]

Safe Format+FRP (Oppo) A94

Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP (Oppo)
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port (COM22)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&13110a19&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6779 [0725] Helio P90 k79v1
Details : 8A00,CA01,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 72F26CEE7B978FA78C226C5E23696842
SoC ID[0] : AF83788E1B3196D7847B2EBC23001214
SoC ID[1] : CFEC6A08115817FEA3FC94E6628591EE
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_k79v1_64.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : AD014839485131354146414D42444152 [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000080000 [512.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : H9HQ15AFAMBDAR
CID : AD014839485131354146414D42444152
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Executing Safe Format (Oppo)...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20240912_171225.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&55ce37d&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 1023DD98B285E5C819D5767EBFF3912A
SoC ID[0] : 40741D64B7F99E035D51812F8C0932E5
SoC ID[1] : 3CE4DE5F6C41B6A95A3366377ECSRFH2J
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : A3A562
CID : D60103413341353632119BCF33D0A23D
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001CCF000000 [115.23 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20456133_177734.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM5)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&55ce37d&0&6#{a5scbf10-6530-11d2-901f-00c04fb951es}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 70750AE33E35B4X7808BF541C13FEC5AAW
SoC ID[0] : AE4C1DBE3D7DE90C4W02C9109263D4BD4H
SoC ID[1] : 35C2E25AC08FAB3DABA3C686D9D89466DM
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DAB
CID : 15010044503644414202Z3DEED20319D9M
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 206786422_175681.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Read Info
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3504fc4d&1&4#{86e0d1e0-8089-11d0-9ce4-6643e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:False]
MEID : A13A295CF54E9A567H77HHF3FF64A410A3HY
SoC ID[0] : C9F1C9ADD5E6AAD456673977BCFC95KQ
SoC ID[1] : 9DE7BA1A89BB33456G7F621D2CBB69DADN
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_tc422_wifi.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : D60103413341353531MSW35GE42D368022 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : A3A551
CID : D601034133413535311122EDE42D9909
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x000000073A000000 [28.91 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Mon Jul 8 15:34:51 CST 2024
Display ID : TB300FU_S101091_240708_ROW
Ver. Inc. : TB300FU_USR_S101091_240708_MP1V1111_ROW
Locale : en-US
Patch : 2024-07-05
Bootloader : LOCKED
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20240917_103541.log

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3504fc2d&1&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:False]
MEID : A13A295CF54E9A567H77HHF3FF64A410A3HY
SoC ID[0] : C9F1C9ADD5E6AAD456673977BCFC95KQ
SoC ID[1] : 9DE7BA1A89BB33456G7F621D2CBB69DADN
Running Exploit... Installing Filter... OK Done
Downloading Preloader...OK
Saved as : preloader_tc422_wifi.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : D60103413341345881122EDE42D99MX [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : A3A551
CID : D601034133413DB5311122EDE423466M
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x000000073A000000 [28.91 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Mon Jul 8 15:34:51 CST 2024
Display ID : TB300FU_S101091_240708_ROW
Ver. Inc. : TB300FU_USR_S101091_240708_MP1V1111_ROW
Locale : en-US
Patch : 2024-07-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20743233_113466.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM4)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 61CD0E094D1FE5099725606BDF103247D
SoC ID[0] : AA39C694F12D6A365A24089AA2C9379C
SoC ID[1] : 1F99DC221FBECA4DC1F3658BA01266BA
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_x656_h6211.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E53391019722F982711304A394B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : S0J9K9
CID : 13014E53304391019722F982711A394B
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1F000000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 10
Build Dt. : Wed Aug 12 11:31:48 CST 2020
Display ID : X656-H6211DLNP-Q-OP-200812V318
Ver. Inc. : DLNP-OP-200812V318
Locale : en-US
Patch : 2020-08-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20789733_126785.log

 

[bronce]

USING PL_EXLOIT [INFINIX V4]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM17)
Device Path : \\?\usb#vid_0e8d&pid_2000#7&1014e877&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 86653F0B73FE2B51690AF13C09667963
SoC ID[0] : 0F93534E79585D7645C410DF5B1C5124
SoC ID[1] : 8C7B1C6B3B888E0F3E7195845F2038F9
Using Internal DA!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : AKJ41X
CID : F40122414B4A34315814327B07937A73
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003A40000000 [233.00 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20240919_171322.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Flash Scatter
Using Preloader from Firmware
BOOT CFG : [BROM EXPLOIT : ON]
PL : D:\Cell\Xiaomi\Redmi A1\ice_global_images_V13.0.18.0.SGMMIXM_20230705.0 000.00_12.0_46e72839e4\ice_global_images_V13.0.18. 0.SGMMIXM_12.0\images\preloader_ice.bin
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&16a0d3be&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 7912F16848C0948E1CEDD6BD543CE87E
SoC ID[0] : E7AD90FA4FCAA6CEC351732CC58A708C
SoC ID[1] : 542893722470D4D6797804832249424B
Running Exploit...Done
Preloader : preloader_ice.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B01005932503033320055D946G68NH5M [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : Y2P032
CID : 9B01005932503033320055D97654MT
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : UNLOCKED
Writing preloader [preloader_ice.bin]...OK
Writing cust [cust.img]...OK
Writing rescue [rescue.img]...OK
Writing efuse [efuse.img]...OK
Writing md1img_a [md1img.img]...OK
Writing spmfw_a [spmfw.img]...OK
Writing scp_a [scp.img]...OK
Writing sspm_a [sspm.img]...OK
Writing lk_a [lk.img]...OK
Writing boot_a [boot.img]...OK
Writing dtbo_a [dtbo.img]...OK
Writing tee_a [tee.img]...OK
Writing logo_a [logo.bin]...OK
Writing vbmeta_a [vbmeta.img]...OK
Writing vbmeta_system_a [vbmeta_system.img]...OK
Writing vbmeta_vendor_a [vbmeta_vendor.img]...OK
Writing logo_b [logo.bin]...OK
Writing super [super.img]...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v1.5]
Log Saved : 20678422_107841.log