UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

Abdullah · Aug 21, 2018

Post Here Sucessfully Repaired Phones By Umt Tool

maanarman · Aug 27, 2018

Motorola Turbo FRP Remoce Umt Tool

Code:

Brand    : Motorola
Model    : XT1254
Operation    : Reset FRP
Searching for Device in FastBoot Mode...OK
Reading Phone Information...OK
Model    : XT1254
Boot Ver.    : moto-apq8084-70.96
Baseband    : MDM9625_41.51.07.22.04R QUARK_CUST
Software    : Blur_Version.24.91.5.quark_verizon.verizon.en.US
IMEI    : 990005119810118
CPU    : APQ8084 ES1.1
RAM    : 3072MB Hynix S8 SDRAM DIE=6Gb
EMMC    : 32GB Samsung REV=07 PRV=0B TYPE=57
Setting Factory Mode...OK
Searching Network Interface...Found
Connecting to device...OK
Model    : XT1254
Bootloader    : 0x7096
Baseband    : MDM9625_41.51.07.22.04R QUARK_CUST
Build    : Blur_Version.24.91.5.quark_verizon.verizon.en.US
Android    : 6.0.1
Searching Network Interface...Found
Connecting to device...OK
Model    : XT1254
Bootloader    : 0x7096
Baseband    : MDM9625_41.51.07.22.04R QUARK_CUST
Build    : Blur_Version.24.91.5.quark_verizon.verizon.en.US
Android    : 6.0.1
Retetting FRP...OK
Searching for Device in FastBoot Mode...OK
Removing Factory Mode...OK
Operation Finished.
Module Ver. 0.1

Deepesh Sharma · Sep 3, 2018

Lenovo A6000 Only Vibrate Done With Flashing

Code:

Operation    : Flash
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1507000 [8916] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8916_014.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8916, eMMC, 16 GB
LU Count    : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [S86518C1_Online_V011.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [system_14.img] -> [system] ...Done
Writing [system_15.img] -> [system] ...Done
Writing [system_16.img] -> [system] ...Done
Writing [system_17.img] -> [system] ...Done
Writing [system_18.img] -> [system] ...Done
Writing [system_19.img] -> [system] ...Done
Writing [system_20.img] -> [system] ...Done
Writing [system_21.img] -> [system] ...Done
Writing [system_22.img] -> [system] ...Done
Writing [system_23.img] -> [system] ...Done
Writing [system_24.img] -> [system] ...Done
Writing [system_25.img] -> [system] ...Done
Writing [system_26.img] -> [system] ...Done
Writing [system_27.img] -> [system] ...Done
Writing [system_28.img] -> [system] ...Done
Writing [system_29.img] -> [system] ...Done
Writing [system_30.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [cache_4.img] -> [cache] ...Done
Writing [cache_5.img] -> [cache] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [userdata_14.img] -> [userdata] ...Done
Writing [userdata_15.img] -> [userdata] ...Done
Writing [userdata_16.img] -> [userdata] ...Done
Writing [userdata_17.img] -> [userdata] ...Done
Writing [userdata_18.img] -> [userdata] ...Done
Writing [userdata_19.img] -> [userdata] ...Done
Writing [userdata_20.img] -> [userdata] ...Done
Writing [userdata_21.img] -> [userdata] ...Done
Writing [userdata_22.img] -> [userdata] ...Done
Writing [userdata_23.img] -> [userdata] ...Done
Writing [userdata_24.img] -> [userdata] ...Done
Writing [userdata_25.img] -> [userdata] ...Done
Writing [userdata_26.img] -> [userdata] ...Done
Writing [userdata_27.img] -> [userdata] ...Done
Writing [userdata_28.img] -> [userdata] ...Done
Writing [userdata_29.img] -> [userdata] ...Done
Writing [userdata_30.img] -> [userdata] ...Done
Writing [userdata_31.img] -> [userdata] ...Done
Writing [userdata_32.img] -> [userdata] ...Done
Writing [userdata_33.img] -> [userdata] ...Done
Writing [userdata_34.img] -> [userdata] ...Done
Writing [userdata_35.img] -> [userdata] ...Done
Writing [userdata_36.img] -> [userdata] ...Done
Writing [userdata_37.img] -> [userdata] ...Done
Writing [userdata_38.img] -> [userdata] ...Done
Writing [userdata_39.img] -> [userdata] ...Done
Writing [userdata_40.img] -> [userdata] ...Done
Writing [userdata_41.img] -> [userdata] ...Done
Writing [userdata_42.img] -> [userdata] ...Done
Writing [userdata_43.img] -> [userdata] ...Done
Writing [userdata_44.img] -> [userdata] ...Done
Writing [userdata_45.img] -> [userdata] ...Done
Writing [userdata_46.img] -> [userdata] ...Done
Writing [userdata_47.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
Module Ver. 2.6

Deepesh Sharma · Sep 6, 2018

Lyf Ls-5016 REset FRp Lock

Code:

Device    : LYF LS-5016
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1009600 [8909] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8909, eMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : LYF LS-5016 [msm8909]
Software    : LS-5016-S17B_LYF_L12EN_200_160824, 6f00456 [Wed Apr 12 19:49:38 CST 2017]
Android Ver.    : 6.0.1
Patch Level    : 2017-01-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.

maanarman · Sep 8, 2018

Infinix X553 FRP Remove done

Code:

Operation    : Reset FRP
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info    : ZTE Corporation, zghsser.sys, 5.2104.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1B09100 [8929] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8929_001.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8929, eMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : unknown MSM8916 for arm64 [msm8916]
Software    : X553-W82918-A1-L-S004-20151013, X553-W82918-A1-L-S004-20151013 [Tue Oct 13 22:51:31 CST 2015]
Android Ver.    : 5.1.1
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 2.6

maanarman · Sep 9, 2018

Oppo A71 Phone Lock Remove

Code:

Device    : Oppo A71 (CPH1801)
Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM67)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1A00900 [8953] 00000000
OPK_DATA    : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 2.7.0

Tiến Dũng GSM · Sep 11, 2018

Oppo F3+ repai imei done

Code:

Operation    : Write QCN

Opening Port... OK

Reading Phone Information... OK

Compile    : Apr 13 2018 00:33:36

Release    : Oct 11 2017 03:00:00

Hw Ver.    : 8976.gen

Build    : MPSS.TA.2.2.c7-00034-8976_GEN_PACK-1.118085.1.119441.1_VENDOR

IMEI    : 352545454545458

MEID    : 00000000000000

Sending SPC [000000]... OK OK

QCN File    : F3PLUS[MPSS.TA.2.2.c7-00034-8976_GEN_PACK-1.88069.1.89056.1_VENDOR].qcn

Format    : QPST QCN

Restoring QCN Data... Done

Port Closed.

Please reboot phone.

Operation Finished.

Elapsed Time: 00:22

[Module Ver. 5.2]

Log Saved to Logs\180911_122901.log

maanarman · Sep 15, 2018

Samsung J710f FRP Bypass With Umt Dongle

Code:

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM241 : SAMSUNG Mobile USB Modem #342
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J710F
IMEI: 355615080439116
Software: J710FXXU4BRB2/J710FOJV4BRB1/J710FXXU4BRB2/J710FXXU4BRB2
Init Download Mode... OK
Port: COM125 : SAMSUNG Mobile USB Modem #5
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:52
[Ultimate Samsung Flasher v1.4]

Deepesh Sharma · Sep 23, 2018

Samsung On8 Frp Remove SucessFully With Umt Frp tool
Reset Frp

Deepesh Sharma · Oct 1, 2018

Micromax Yu5510a Qualcom9008 Port Recover done

Please login to view image

Rameez · Oct 6, 2018

Moto E4 Frp Done with UMT

Port : Fastboot Inteface
Baud Rate : Not Applicable
Device : Motorola
Operation : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1767
Boot Ver. : moto-msm8917-BA.09(*)
Baseband : M8917_16000.269.04.03.01R PERRY_NA_CUST
Software : Blur_Version.26.201.3.perry_verizon.verizon.en.US
IMEI : 353308087505830
CPU : MSM8917
RAM : 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
EMMC : 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model : Moto E (4)
Bootloader : 0xBA09
Baseband : M8917_16000.269.04.03.01R PERRY_NA_CUST
Build : Blur_Version.26.201.3.perry_verizon.verizon.en.US
Android : 7.1.1
Searching Network Interface... Found
Connecting to device... OK
Model : Moto E (4)
Bootloader : 0xBA09
Baseband : M8917_16000.269.04.03.01R PERRY_NA_CUST
Build : Blur_Version.26.201.3.perry_verizon.verizon.en.US
Android : 7.1.1
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 20:42
[Module Ver. 5.2]

Please login to view image

Rameez · Oct 6, 2018

J106H FRP Done By UMT

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM9 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:15
[Ultimate Samsung Flasher v1.4]

Please login to view image

Deepesh Sharma · Oct 7, 2018

Samsung J3Pro Frp remove In Download MOde

Please login to view image

maanarman · Oct 17, 2018

Oppo A37f Remove Pattern And FRP Done

Code:

Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM13)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 5.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1507000 [8916] 00000000
OPK_DATA    : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8916, eMMC, 16 GB
LU Count    : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : OPPO A37f [msm8916]
Software    : A37fEX_11_171008, 1480422943 [Sun Oct  8 17:26:49 CST 2017]
Android Ver.    : 5.1.1
Patch Level    : 2017-09-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 2.7.0

Deepesh Sharma · Oct 21, 2018

One Plus Remove User Locks+Frp

Please login to view image

maanarman · Oct 23, 2018

Motorola Moto C FRP Remove Done

Code:

Waiting for Phone in BROM Mode...
Connect Power Off phone now...
Port : PreLoader USB VCOM Port (COM9)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Start FRP Reset Task...
Hardware : MT6580_S00
Resetting FRP...
FRP Reset Done.
Disconnect cable and Power ON phone.

maanarman · Oct 30, 2018

Samsung J500h FRP Bypass Done

Code:

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM721 : SAMSUNG Mobile USB Modem #522
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J500H
IMEI: 351811077309644
Software: J500HXXU2BQI1/J500HOJV2BQI1/J500HXXU2BQA1/J500HXXU2BQI1
Init Download Mode... OK
Port: COM136 : SAMSUNG Mobile USB Modem #8
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:59
[Ultimate Samsung Flasher v1.4]

maanarman · Nov 3, 2018

Samsung G361h FRP Remove Done

Code:

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM1037 : SAMSUNG Mobile USB Modem #651
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G361H
IMEI: 354202079220863
Software: G361HXXS0APE1/G361HOJV0APD1/G361HXXU0APB2/G361HXXS0APE1
Init Download Mode... OK
Port: COM125 : SAMSUNG Mobile USB Modem #5
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:54
[Ultimate Samsung Flasher v1.4]

diesel6 · Nov 9, 2018

oppo a37 pettren and frp remove done

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM223)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_171209, 1480422943 [Sat Dec 9 16:58:03 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.3

diesel6 · Nov 9, 2018

vivo y51 pettren and frp remove done

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM223)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo Y51 [msm8916]
Software : LRX22G release-keys, eng.compiler.20171201.164954 [Fri Dec 1 16:53:32 CST 2017]
Android Ver. : 5.0.2
Patch Level : 2017-11-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.3

UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Active Member

Friend's Martview

Friend's Martview

Friend's Martview

Active Member

Active Member

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Active Member

Active Member