Card found : 2AAC279A , v0153
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : HiSense : HLTE100E_U963
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : False ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
UserData : STATE : ENCRYPTED
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:21
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2021
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 47415
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 26.11.2020
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03_03_01_ZA04
Ver. Incmt : Hisense_HLTE100E_14_S07
SECSolution : MODERN [RS/0S/1S/2S]
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
>>> ERROR : BOOT ACK not received!
>>> Error : Fail to init protocol!
>>> Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : False ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
PMTMng : Skip update! Reason : FWRead has been not complete by user!
Prepare target ...
ERROR : 000000A2:A2000000FF5D7E00
GEN : UNKNOWN RESPONSE!
>>> Error : Flashing failed!
>>> Check previous message for more info!
Reconnect Power/Cable!
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : HiSense : HLTE100E_U963
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : False ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
UserData : STATE : ENCRYPTED
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:21
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2021
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 47415
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 26.11.2020
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03_03_01_ZA04
Ver. Incmt : Hisense_HLTE100E_14_S07
SECSolution : MODERN [RS/0S/1S/2S]
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
>>> ERROR : BOOT ACK not received!
>>> Error : Fail to init protocol!
>>> Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : False ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
PMTMng : Skip update! Reason : FWRead has been not complete by user!
Prepare target ...
ERROR : 000000A2:A2000000FF5D7E00
GEN : UNKNOWN RESPONSE!
>>> Error : Flashing failed!
>>> Check previous message for more info!
Reconnect Power/Cable!
