Hello
Can any one confirm this method?
Can second sim imei repaired without hardware?
Thanks in advance
Can any one confirm this method?
Can second sim imei repaired without hardware?
Thanks in advance
UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool
- Thread starter Abdullah
- Start date
UMT Box
mian.sajid
Moderator
mian.sajid
Moderator
If u find my post helpful ,Like button is just 1 Click away!
mian.sajid
Moderator
If u find my post helpful ,Like button is just 1 Click away!
Brand/Model : Auto / Auto Detect
Operation : Safe Format+FRP
PL Exploit : VIVO
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM39)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&323149bf&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : CF7951ACE2E284B969092665A27CC6D6
SoC ID[0] : 85FDDAB7AA83A9C4DA8257B2ED959474
SoC ID[1] : E51BA6B2206C5BE7F8B0C710B8C0C623
WARNING! DA Auth is Enabled! Only Special DA will work!
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : DX68MB
CID : 150100445836384D42090A99CECD38F7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
And. Ver. : 11
Prod. Ver. : PD2036F_EX_A_6.16.12
Hw. Ver. : PD2036F_EXMA
Build Dt. : Thu May 4 14:55:42 CST 2023
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20230504.145730
Locale : en-US
Patch : 2023-05-01
Bootloader : LOCKED
Formatting Userdata (Safe Mode)...OK
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.8]
Log Saved : 20240504_172831.log
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM121)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1209700 [8952] 00000400
OPK_DATA : 025843819772C7B86130317DEEFCA484196D58DA44C4702F917B86299A61F8CB
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8952_020]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8952, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ZTE K88 [msm8952] [jasmine]
Brand : ZTE
Prod.Name : K88
Software : K88V1.0.0B11, 20160612.123705 [Sun Jun 12 12:42:36 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-06-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.2
armanking
Active Member
Operation : Reset FRP
Searching for COM1.0 Device...Found!
COM105 : HUAWEI USB COM 1.0 (COM105)
Opening Port...OK
Platform : Kirin_970
Sending Loader...[1]..[2]..[3]..Done
Searching for Device in FastBoot Mode...OK
Model : BLA-L09
Build : BLA-L09 12.0.0.225(C432E4R1P1)
BL Status : Unlocked
User Status : Locked
IMEI1 : Unknown
IMEI2 : Unknown
MEID : Unknown
Resetting FRP...Done
Device will reboot and wipe.
Operation Finished.
UltimateHST v0.2
Searching for COM1.0 Device...Found!
COM105 : HUAWEI USB COM 1.0 (COM105)
Opening Port...OK
Platform : Kirin_970
Sending Loader...[1]..[2]..[3]..Done
Searching for Device in FastBoot Mode...OK
Model : BLA-L09
Build : BLA-L09 12.0.0.225(C432E4R1P1)
BL Status : Unlocked
User Status : Locked
IMEI1 : Unknown
IMEI2 : Unknown
MEID : Unknown
Resetting FRP...Done
Device will reboot and wipe.
Operation Finished.
UltimateHST v0.2
- Remove FRP BQ aquaris X5
Code:
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8916, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : bq Aquaris X5 [msm8916] [Aquaris_X5]
Brand : bq
Prod.Name : Aquaris_X5
Software : 5.2.0_20180228-1305, 5.2.0_20180228-1305 [Wed Feb 28 15:15:15 CET 2018]
Android Ver. : 7.1.2
Patch Level : 2018-01-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.5Mao-lx9n. Huawei nova 11i
Operation : Remove Huawei ID (Automatic Reest)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 6D001500
OPK_DATA : E2D62B196391DF63693F01E753DC831C3A831CF3CA9D702A1C2EB2F1374208B2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01D7E800] [0x00000800] [0x00000800] [0x00002000] [0x00047000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build :
Int. Build :
Reading Backup...
Backup : Huawei_Id_Backup_SM6225_240507_121051.bak
If device stuck in boot loop, restore this backup.
Resetting Huawei ID...Done
Operation Finished.
QcFire Ver. 9.5
After hard reset
Operation : Remove Huawei ID (Automatic Reest)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 6D001500
OPK_DATA : E2D62B196391DF63693F01E753DC831C3A831CF3CA9D702A1C2EB2F1374208B2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01D7E800] [0x00000800] [0x00000800] [0x00002000] [0x00047000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build :
Int. Build :
Reading Backup...
Backup : Huawei_Id_Backup_SM6225_240507_121051.bak
If device stuck in boot loop, restore this backup.
Resetting Huawei ID...Done
Operation Finished.
QcFire Ver. 9.5
After hard reset
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_003]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1727 [msm8953_64]
Brand : vivo
Prod.Name : msm8953_64
Software : OPM1.171019.011 release-keys, eng.compil.20180703.180334 [Tue Jul 3 18:03:34 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-06-01
Formatting userdata...FailedPatched OK
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 9.6
mian.sajid
Moderator
Buy Emmc activation but still not activated
even i renew my umt license but not work how to solve
even i renew my umt license but not work how to solve
mian.sajid
Moderator
mian.sajid
Moderator
Abdul Malik
Active Member
USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : IMEI Repair (Generic Method)
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM92)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&3226d6ac&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : E932FCA03C45AEB22C85DD5552051353
SoC ID[0] : B576222623C80F0E3A4FE1E3C63ED793
SoC ID[1] : 6A825FC0A35FFDBA25AC55232E46A3E8
Sending 1st DA..OK
Jump DA Address...OK
Syncing...Failed!
Operation Finished.
[UltimateMTK2 v1.3]
Log Saved : 20240519_181231.log
cannot work umt or pandora box
Brand/Model : *Auto* / *Auto Detect*
Operation : IMEI Repair (Generic Method)
BOOT CFG : [PL_EXPLOIT : ON]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM92)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&3226d6ac&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : E932FCA03C45AEB22C85DD5552051353
SoC ID[0] : B576222623C80F0E3A4FE1E3C63ED793
SoC ID[1] : 6A825FC0A35FFDBA25AC55232E46A3E8
Sending 1st DA..OK
Jump DA Address...OK
Syncing...Failed!
Operation Finished.
[UltimateMTK2 v1.3]
Log Saved : 20240519_181231.log
cannot work umt or pandora box