aftab_ansari5287
Super Moderator
Yes Restore Only NVRAM.
Last edited:
UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool
- Thread starter Abdullah
- Start date
UMT Box
OPPO A37F READ PATTERN JUST ONE CLICK BY UMT
INFO
READ PATTERN
INFO
READ PATTERN
P
VIVO V9 (vivo 1723) Same Imei (865407010000009) Sequrity Repair Done free
How to Repair :
1-Download This Firmware Vivo V9 Imei Repair Firmware without password
2-Flash Any Qualcomm Flash tool (UMT, QFIL, UFI, MIRACLE) ETC.
3-(1) Enable ADB (2) Enable Daig Port *#558#
4-Open Ultimate Multi Tool - GSM International
ice_screenshot_20210221-113121.png
Note-IMEI CHANGE IS ILLIGAL Restore OG IMEI
5-REBOOT DEVICE AND CHECK IMEI (*#06#) if network not coming write qcn job done
photo_2021-02-21_11-13-02.jpg photo_2021-02-21_11-12-57.jpg
6-QCN FILE CREADIT-VIVO_V9_QCN_BY_ZS_MALIK_2 (DOWNLOAD FROM ATTACHMENT)
if my post helpfull. dont forget to like button
the small prince
Perfect qcn file for vivo v9 100% work,thanks
VIVO V9 (vivo 1723) Same Imei (865407010000009) Sequrity Repair Done free
How to Repair :
1-Download This Firmware Vivo V9 Imei Repair Firmware without password
2-Flash Any Qualcomm Flash tool (UMT, QFIL, UFI, MIRACLE) ETC.
3-(1) Enable ADB (2) Enable Daig Port *#558#
4-Open Ultimate Multi Tool - GSM International
ice_screenshot_20210221-113121.png
Note-IMEI CHANGE IS ILLIGAL Restore OG IMEI
5-REBOOT DEVICE AND CHECK IMEI (*#06#) if network not coming write qcn job done
photo_2021-02-21_11-13-02.jpg photo_2021-02-21_11-12-57.jpg
6-QCN FILE CREADIT-VIVO_V9_QCN_BY_ZS_MALIK_2 (DOWNLOAD FROM ATTACHMENT)
if my post helpfull. dont forget to like button
the small prince
Perfect qcn file for vivo v9 100% work,thanks
Huawei Y9 2019 Frp done via UltimateHST
FRP Reset in Test point mode Via Ultimate HST
FRP Reset in Test point mode Via Ultimate HST
aftab_ansari5287
Super Moderator
If u have all solution post on martview.forum.com
You delete your number, you can't call anyone like this.
Oppo A1K Unlock Pattern Password With UMT Pro Dongle
Video Tutorial is here [emoji3596]
Sent From GM1915 Using Martview Forum App
Video Tutorial is here [emoji3596]
Sent From GM1915 Using Martview Forum App
Redmi 6A successfully repair both IMEI 1 and IMEI 2. After write Original IMEI 1 and IMEI 2 stuck at NV Data Corrupted.
After that Remove one of the Resistor provided with IMAGE by UMT. After that restart phone and stuck again at NV Data Corrupted. Just select restart from Recovery Menu. 100% Tested.
Thank You
UMT Team.
After that Remove one of the Resistor provided with IMAGE by UMT. After that restart phone and stuck again at NV Data Corrupted. Just select restart from Recovery Menu. 100% Tested.
Thank You
UMT Team.
Attachments
-
redmi6_6a_hw_mod.png -
Redmi 6A IMEI Repair.jpg
Last edited:
kabirsoft
Active Member
- Oct 4, 2019
- 62
- 16
Brand : Samsung
Model : J700F
Operation : Reset FRP
Searching for Phone...Found
Port: : COM35 : SAMSUNG Mobile USB Modem #13
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7580 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5
Model : J700F
Operation : Reset FRP
Searching for Phone...Found
Port: : COM35 : SAMSUNG Mobile USB Modem #13
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7580 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5
yuslamunique
Friend's Martview
Ashok madivala
Active Member
Realme 6i RMX2040 Pattern Unlock
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM82
Port Name: MediaTek USB Port_V1632 (COM82)
Path: \\?\usb#vid_0e8d&pid_0003#6&11e5a5e7&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_oppo6769_210728_201357.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM82)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Tue May 12 23:12:55 CST 2020
Build Flavor : full_oppo6769-user
Build Desc. : full_oppo6769-user 10 QP1A.190711.020 68b77aba7cb33275 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2020-05-05
Platform : MT6768
Board : oppo6769
Platform : mt6768
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM82
Port Name: MediaTek USB Port_V1632 (COM82)
Path: \\?\usb#vid_0e8d&pid_0003#6&11e5a5e7&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0707, [MT6768]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_oppo6769_210728_201357.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM82)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Tue May 12 23:12:55 CST 2020
Build Flavor : full_oppo6769-user
Build Desc. : full_oppo6769-user 10 QP1A.190711.020 68b77aba7cb33275 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2020-05-05
Platform : MT6768
Board : oppo6769
Platform : mt6768
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
Misir Ali
Member
XIAOMI REDMI 7A STUCK ON LOGO SOLVED BY UMT
GSM *AR
Junior Member
oPPo A57 Pattern / pin / passcode unlocked By UMT
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO CPH1701 [msm8937] [CPH1701]
Brand : OPPO
Prod.Name : CPH1701
Software : CPH1701EX_11_A.34_180806, eng.root.20180806.181819 [Mon Aug 6 18:20:59 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-05-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.2
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 2729EC539F0C70FA21C67CD1B8C249998B3D85E480BE31DB27277ABB926ECC2D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO CPH1701 [msm8937] [CPH1701]
Brand : OPPO
Prod.Name : CPH1701
Software : CPH1701EX_11_A.34_180806, eng.root.20180806.181819 [Mon Aug 6 18:20:59 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-05-05
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.2
LAVA LS000Z1 ONE CLICK DONE IN UMT
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM35)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Manufacturer : LAVA
Build Date : Fri Jun 11 12:17:50 IST 2021
Build Flavor : Z1-user
Build Desc. : Lava_Z1_SW_V07_20210611
Android Ver. : 10
Display ID : Lava_Z1_SW_V07_20210611
Patch Level : 2021-04-05
Platform : MT6761
Board : Z1
Platform : mt6761
Userdata is NOT ENCRYPTED
Formatting Userdata...
- Success!
Disconnect Battery/Cable and Power On Phone.
umrez
Junior Member
aftab_ansari5287
Super Moderator
