UMT UMT Box / PRO Modules Updates Here

[GsmToto]

Device : Xiaomi Poco M3
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD3
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20230330215157, V14.0.2.0.SJFMIXM [Thu Mar 30 21:57:40 CST 2023]
Android Ver. : 12
Patch Level : 2023-03-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6526594846
Display ID : 47BR-A3CO-2RX7-VOG
Writing Data...Done
Operation Finished.
QcFire Ver. 9.3

 

[SPYROS]

UMT iOSTool v4.0
The Ultimate iOSTool

Please login to view image

This is For Checkm8 Vulnerable iDevices & Open Menu iCloud Remove by Token

Requirements:

- PWNDFU For (Mac or Windows) using Winra1n or gaster etc...
- Win7-X64 / Win8-X64 / Win10-X64 / Win11-X64
- Microsoft NetFramework 4.7.2
- iTunes Installed


Supported iOS Versions For Ramdisk Operations : Up to 16.X



Features:

• Read Apple ID.
• Read WIFI & BT Address.
• Get/ Backup Hello Activation.
• Activate Hello Bypass (No Signal).
• Backup Passcode Activation.
• Backup Passcode Activation & Auto Erase device.
• Restore Passcode Activation.
• FMI OFF (iCloud Open Menu).
• PWNDFU Gaster.
• PWNDFU Checkm8.
• fix drivers.
• Exit Recovery.
• Install libUsbK Drivers.
• Test SSH after Ramdisk Boot.

Added:

Remove iCloud Open Menu by Token - FMI OFF

• it is used for open Menu mobiles and for users who forgot their iCloud passwords in order to bypass FMI and flash phone and set up new iCloud on phone.

Supported Models All iPhones & iPads until date.

Starting from:

• iPhone 5s - Till iPhone 15 Pro Max
• iPad 5 - Till date.

Supported Models for FMI OFF Open Menu

• All Models until date

Supported Models list For Ramdisk Operations.


Boot IOS 11x to 15x

• iPhone5s
• iPhone6
• iPhone6Plus
• iPhone6s
• iPhone6sPlus
• iPhoneSE
• iPhone7
• iPhone7Plus
• iPhone8
• iPhone8Plus
• iPhoneX
• iPad mini 4
• iPad Air2 Cellular
• iPad 5th Gen.
• iPad 6th Gen.
• iPad 7th Gen.
• iPad Pro 9.7-inch
• iPad Pro 10.5 inch
• iPad Pro 12.9 inch

Boot iOS 16.0-16.X (No Boot Loop)

• iPhone8
• iPhone8Plus
• iPhoneX
• iPad 5th Gen.
• iPad 6th Gen.
• iPad 7th Gen.
• iPad Pro 9.7-inch
• iPad Pro 10.5 inch
• iPad Pro 12.9 inch

UMT IOS TOOL MANUALS HERE



Important Note 2:

This Module is based on EMMC/HST Addon activation. Your card must have this activation in order for this module to work for you.

Official Website:


Ultimate Multi Tool
Ultimate Multi Tool Pro


TELEGRAM OFFICIAL Group:

U.M.T (c) Official Support


Download From :


UMT_iOS_Installer_v4.0.rar


Password for Archive: UmtTeam

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : EACD6EEB71CA56240B6FFEF9F565AD07
SoC ID[0] : 992BF6E5BD7A7A0CF8A0A31929A7A865
SoC ID[1] : 974127CB68A300BC4B5A10DA257112D5
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_kg5_h6125.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 1501005158363341420315D407F888F5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : QX63AB
CID : 1501005158363341420315D407F888F5
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Wed Jan 11 12:13:37 CST 2023
Display ID : TECNO-RGo-32-230111V606
Ver. Inc. : 230111V952
Locale : en-US
Patch : 2023-01-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 27539644_19275311.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 12E459E0DDCD7F34F44980F18F2F7C20
SoC ID[0] : 14A222B3B73C7149769D27E821E89C36
SoC ID[1] : 825DAB4822D83570A6E2AAF34DEBFF59
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : hC9aP3
CID : 90014A684339615033011052BE73B7D3
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : TECNO MOBILE LIMITED
Ven. Model : TECNO KE7
Platform : mt6768
Ven. Date : Wed Jun 30 16:18:08 CST 2021
Ver. Inc. : 210630V371
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 204668832_16743376.log

 

[cheong966]

Please login to view image

Download From :

https://drive.google.com/file/d/14Bg...usp=drive_link

Password for Archive: UmtTeam

 

[GsmToto]

Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0400&Modem
Port: : COM7 : SAMSUNG Mobile USB Modem #8
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J260M
IMEI: : 358xxxxxxxxxxxx
Software: : J260MUBSDAUJ3/J260MOWODATL2/J260MUBSDAUJ3/J260MUBSDAUJ3
Product : BVO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-J260M
Product : j2corelte
Device : j2corelte
Andriod Ver. : 8.1.0
Patch Level : 2021-10-01
PDA : J260MUBSDAUJ3
Bootloader : J260MUBSDAUJ3
Build ID : M1AJB.J260MUBSDAUJ3
Build Date : Wed Oct 20 21:17:54 KST 2021
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 01:10
[UltimateSams v0.7]
Saved to Logs\2474311_19422317.log

 

[GsmToto]

Device : Xiaomi Redmi Note 8
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, EMMC, 128 GB
LU Count : 4 [0x0E8F8000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V12.0.6.0.QCOMIXM [Sat Jul 24 13:53:24 WIB 2021]
Android Ver. : 10
Patch Level : 2021-07-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 63167622197
Display ID : 435B-F3CJ-HBQR-Q6H
Writing Data...Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1901A00 [SM6375] 0300A406
OPK_DATA : 489DD7DE2DB26F5DBD1CDF921F54B949A93388CEAEE92B0E80 5882C469B2SAZ7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6375_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6375, UFS, 128 GB
LU Count : 6 [0x01D7B800] [0x00000800] [0x00000800] [0x00000800] [0x0004B000] [0x00002800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock...Failed
Using Patch Method... Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM7)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&5ff8910&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
MEID : C966BBA7EB0D866AD136D4E9911E85F4
SoC ID[0] : B31C41E7E305155BD7DEE32AAB89427Z
SoC ID[1] : D18E41A7FC95F4420FC4F044A1D0E4C8
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_k62v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100444836444D4205957A68AA87AF [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DH6DMB
CID : 150100444836444D4205957A68AA87AF
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 40%-50% LIFE TIME USED
Life. Est.B : 40%-50% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Tue Jul 5 17:56:58 CST 2022
Display ID : R.G301.220705.F-ds
Ver. Inc. : 1657015112
Locale : en-US
Patch : 2022-07-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]

 

[GsmToto]

Device : Samsung Galaxy S23 Ultra 5G (SM-S918B) U3
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS918B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS918B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 512 GB
LU Count : 6 [0x076FA000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S918BXXU3BWJM
Int. Build : SM-S918B_EUR_XX_QKEY1
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.3

 

[AhsanGsmLab]

SM-S918U BIT2 LOST MODE NOT WORKING AUTO LOADER NOT SUPPORTED
PLEASE FIX

 

[AhsanGsmLab]

Device : Samsung Galaxy S23 Ultra (SM-S918U) BIT2
Operation : Samsung Lost Mode Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-S918U BIT2.ufl]
Preparing Loader...Done
Sending Loader [SM-S918U BIT2]...Done
Executing Loader...Failed! Possibly Wrong Loader
Please select Loader manually, or use Factory Loader in Custom Option.
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 979D25AA38F410FF1B82D793704EFB5B
SoC ID[0] : 7B3092CF190B741CFCED527B83AF712C
SoC ID[1] : 92F788F745251EE03B322419527261CD
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_p410ae.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : D6010341334134343210F46C27244949 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : A3A442
CID : D6010341334134343210F46C27244949
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001CCF000000 [115,23 GB]
PRE EOL : NORMAL
Life. Est.A : 40%-50% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
Brand : motorola
Manuf. : motorola
Model : moto g22
Device : hawaiip
And. Ver. : 12
Prod. Name : hawaiip_g
Build Dt. : Mon Feb 19 09:47:25 CST 2024
Display ID : STAS32.79-77-28-50-10
Ver. Inc. : 77-28-50-10
Locale : en-US
Patch : 2024-02-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 20859331_098431172.log

 

[SPYROS]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v9.4
The Ultimate Qualcomm Tool



Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator

Please login to view image

Added:

Motorola (Test)
- G30 (XT2129-1)
- G30 (XT2129-2)

Samsung
- Galaxy A6+ (SM-A605F) BIT4
- Galaxy A6+ (SM-A605G) BIT4
- Galaxy A71 5G (SM-A716W) BIT9
- Galaxy A8 Star (SM-G885F) BIT2
- Galaxy A80 (SM-A805) BIT4
- Galaxy A8s (SM-G8870) BIT1
- Galaxy A9 (SM-A920F) BIT1
- Galaxy A90 5G (SM-A905F) BIT4
- Galaxy C7 (SM-C7000) BIT2
- Galaxy J2 Pro (SM-J250F) BIT2
- Galaxy J2 Pro (SM-J250M) BIT5
- Galaxy J4 Core (SM-J410F) BIT2
- Galaxy J4 Core (SM-J410G) BIT1
- Galaxy J4+ (SM-J415F) BIT4
- Galaxy J4+ (SM-J415G) BIT2
- Galaxy J6+ (SM-J610F) BIT3
- Galaxy J6+ (SM-J610G) BIT2
- Galaxy J8 (SM-J810F) BIT4
- Galaxy J8 (SM-J810G) BIT2
- Galaxy J8 (SM-J810M) BIT2
- Galaxy J8 (SM-J810Y) BIT3
- Galaxy M14 (SM-M145F) BIT1
- Galaxy Note 10 (SM-N9700) BIT2
- Galaxy Note 10 (SM-N970U) BIT8
- Galaxy Note 10+ (SM-N975U) BIT8
- Galaxy Note 20 Ultra 5G (SM-N986U) BIT6
- Galaxy Note 8 (SM-N9500) BIT5
- Galaxy Note 9 (SM-N9600) BIT4
- Galaxy S10 (SM-G9730) BIT2
- Galaxy S10+ (SM-G9750) BIT4
- Galaxy S10e (SM-G9700) BIT2
- Galaxy S20 5G (SM-G981U) BIT8
- Galaxy S20 Ultra 5G (SM-G9880) BIT1
- Galaxy S20 Ultra 5G (SM-G988N) BIT1
- Galaxy S20 Ultra 5G (SM-G988U) BIT8
- Galaxy S20 Ultra 5G (SM-G998W) BITA
- Galaxy S20+ 5G (SM-G986N) BIT1
- Galaxy S20+ 5G (SM-G986U) BIT8
- Galaxy S22 5G (SM-S9010) BIT4
- Galaxy S23 Ultra (SM-S918W) BIT2
- Galaxy S23 Ultra 5G (SM-S918N) BIT2
- Galaxy S23+ (SM-S916W) BIT2
- Galaxy S24 (SM-S921U) BIT1
- Galaxy S24 Ultra (SM-S928B) BIT1
- Galaxy S24 Ultra (SM-S928U) BIT1
- Galaxy S24+ (SM-S926U) BIT1
- Galaxy S8 (SC-02J) BIT1
- Galaxy S8 (SM-G9500) BIT4
- Galaxy S8+ (SC-03J) BIT1
- Galaxy S8+ (SM-G9550) BIT4
- Galaxy S9 (SM-G9600) BIT5
- Galaxy S9+ (SM-G9650) BIT5
- Galaxy Tab A (SM-T595) BIT4
- Galaxy Tab S5e (SM-T725) BIT1
- Galaxy Z Flip4 (SM-F721B) BIT5
- Galaxy Z Flip4 (SM-F721U) BIT4

TCL
- TCL 10 5G UW (T790)
- TCL 10 Plus (T782)
- TCL 10 Pro (T799)
- TCL 10L (T770)
- TCL 20 5G (T781)
- TCL 20 A 5G (T768S)
- TCL 20 Ax 5G (T768O)
- TCL 20 Pro 5G (T810)
- TCL 20 SE (T671)
- TCL 20L (T774H)
- TCL 20L+ (T775H)
- TCL 30 V 5G (T781S)
- TCL Plex (T780H)


Updated Motorola Single Image Extraction
- Supported newer singleimage file type
- Now it will extracts all files from singleimage binary


Updated Internal Database for Auto-Detection








CONNECTION METHOD:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

Telegram

U.M.T (c) Official Support Chat


Br,
UMT

 

[GsmToto]

Device : Xiaomi Redmi 5 (MDI1)
Operation : Reset Mi Account (New)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953] [rosy]
Brand : Xiaomi
Prod.Name : rosy
Software : CUSTOMER_VERSION_rosy, V10.3.2.0.ODAMIXM [Fri Jul 5 19:04:21 WIB 2019]
Android Ver. : 8.1.0
Patch Level : 2019-06-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 1855129413
Display ID : 4TI6-FFZW-MRFKQI
Writing Data...Done
Operation Finished.
QcFire Ver. 9.4

 

[GsmToto]

Please login to view image

Device : Motorola G30 (XT2129-2)
Operation : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM42)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 0000E802
OPK_DATA : FB370FAEDD231103AB8E7F378579093745967865DE8B49D489AB6C506824349C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662_007]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, EMMC, 128 GB
LU Count : 4 [0x0E8F6000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA : Encrypted
Operation Finished.
QcFire Ver. 9.4

 

[GsmToto]

USING PL_EXLOIT [VIVO V2]
Brand/Model : Vivo / *Auto Detect*
Operation : Safe Format+FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM23)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&34e9dd7a&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 7C2DE86C9083339641DA11E352016F6F
SoC ID[0] : 32B2A846BD66F4FA118EAAB2131A2119
SoC ID[1] : D8035C7107DAB87171DA1B95442EA3E6
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DBB
CID : 15010044503644424202D80DCAC129C9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2139JF_EX
And. Ver. : 11
Prod. Ver. : PD2139JF_EX_A_11.0.5.2.W20
Hw. Ver. : PD2139JF_EXMA
Build Dt. : Wed Feb 21 10:53:43 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20240221.105718
Locale : en-US
Patch : 2024-02-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 20863355_16955211.log

 

[jazzykenn]

Great update

 

[GsmToto]

USING PL_EXLOIT [INFINIX V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&55ce37d&0&6
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6781 [1066] Helio G96
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 5235F763CAB2201B4A1F6BFD4E8931C2
SoC ID[0] : EE2C9496DD1C7990C936A0803C357E5A
SoC ID[1] : CAB26BFA4F83238BB9AB06CB824CE621
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000060000 [384.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : H9HQ15AFAMBDAR
CID : AD014839485131354146414D42444152
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 256381186_195223.log

 

[GsmToto]

Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0404&Modem
Port: : COM7 : SAMSUNG Mobile USB Modem
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-A325M
IMEI: : 350xxxxxxxxxxxx
Software: : A325MUBS2BVJ1/A325MOWO2BVJ1/A325MUBS2BVJ1/A325MUBS2BVJ1
Product : ZTO
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-A325M
Product : a32
Device : a32
Andriod Ver. : 12
Patch Level : 2022-10-01
PDA : A325MUBS2BVJ1
Bootloader : A325MUBS2BVJ1
Build ID : SP1A.210812.016.A325MUBS2BVJ1
Build Date : Fri Sep 30 06:06:39 KST 2022
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 39:28
[UltimateSams v0.7]
Saved to Logs\26745611_09755123.log