Successfully Unlocked/Debranding phones with or w/Octopus Box Samsung (only here)!!

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung J710GN FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-J710GN phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM136
Selected model: SM-J710GN
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..unsuccessful
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (3/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung A301F FRP Bypass Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect SM-G935F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-A310F
Firmware compiled date: Wed Feb  7 18:08:12 KST 2018
PDA version: FA51_A310FXXU4ARB1
CSC version: unknown
SW version: A310FXXU4ARB1
Phone SN: R28H138S8NX
Android version: 5.1.1 (LMY47X)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7580
HW Modem: SHANNON310
Security patch level: 2015-11-01
Warranty Void: 0
SIM 1 status: absent
SIM 2 status: absent
Codename: a3xeltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data
reset"
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung N920P FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect SM-G531H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM136
Selected model: SM-N920P
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung SM-J200G FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-J320AZ phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-J200G
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G029P FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G920P
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung J320H FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM136
Selected model: SM-J320H
Operation: Reset FRP - UserData
Reset FRP/ Reactivation lock operation for SM-J320H will delete all user
data on the phone (contacts, pictures and others)!

NOTE: You can reset FRP/ Reactivation without losing user data via
Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-J320H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and
make "Factory data reset"
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G550T FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G550T
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung A310F Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
Selected AP file: G:\SAMSUNG\A310F 6.0\SM-A310F_1_
20180208115201_0za55dcuz5\A310FXXU4CRB1_A310FOXX4CRB1
_A310FXXU4CRB2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung N920C FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-N920C
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G361H Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-J320A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: g361hxxu0aog3_g361hojv0aog1_ksa_android_5.1.1_2.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G361H into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing WDSP section...
WDSP section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G92T FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-J710F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G920T
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G920T Unlock Done

Code:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G920T
Operation: Unlock
Detected phone model: SM-G920T
Firmware compiled date: Fri Mar  9 18:02:26 KST 2018
PDA version: G920TUVS6FRC1
CSC version: G920TTMB6FRC1
SW version: G920TUVS6FRC1
Phone SN: R58GB2MXJGZ
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-03-01
Warranty Void: 1
SIM 1 status: network locked
Codename: zerofltetmo
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-SM-G920T-R58GB2MXJGZ-27-12-2018_22-25-51-.asec file
Unlocking phone...
Initializing exploit...OK
Executing exploit...
Executing exploit failed
Initializing exploit...
Executing exploit...
Exploit has been executed successfully
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung A310F Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect GT-I9060I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected AP file: G:\SAMSUNG\A310F 6.0\SM-A310F_1_20180208115201_0za55dcuz5\A310FXXU4CRB1_A310FOXX4CRB1_A310FXXU4CRB2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

Deepesh Sharma

Friend's Martview
Apr 4, 2017
1,712
3,144
India
Sonork ID
100.1614172
B355 Recovered Successfully
 

Zain UL Abideen

Active Member
Aug 27, 2019
80
147
Earth
This Released Update Is Really BOOM BOOM

Thanks Octopus Developers



No Any Error
No Downgrade Modem






SW Logs




JavaScript:
Platform: Samsung Android
Selected port: COM8
Selected model: SM-J600FN
Operation: Repair Network
Detected phone model: SM-J600FN
Firmware compiled date: Wed Dec  4 12:16:14 KST 2019
PDA version: J600FNXXU6BSL1
CSC version: J600FNOXM6BSL1
SW version: J600FXXU6BSK2
Build number: QB14449434
Phone SN: RF8K70NHTRK
Android version: 9 (PPR1.180610.011)
Sales code: BTU
Country: UK & IRE
HW platform: exynos5
HW Chip: unknown
HW Modem: SHANNON315
Security patch level: 2019-12-01
Warranty Void: 0
SIM 1 status: absent
Codename: j6ltexx
Checking Root:
Phone is Rooted.
-----------------------------------------------------------------------------------
Connecting to server ..
Username: zain012
Connect to server successfull.
Checking smart card...
Smart card successfully checked.
Your balance: 100 credits.
Checking operation...OK
-----------------------------------------------------------------------------------
Repairing network. Please wait, this can take some time...OK
Network is successfully repaired.
Performed by 2.9.1 Software version.


Imei Status Proof







*Hit Only The Like Button
*Follow The Rules Of Forum


Best Regards.
Zain UL Abideen
 

Varoxx

Active Member
Nov 6, 2019
82
49
Samsung G935A U8 network unlock code read done by Octoplus

Read Codes” operation!"
WARN : 7/27/2021 12:35:49 PM >
WARN : 7/27/2021 12:35:49 PM > Continue?
WARN : 7/27/2021 12:35:49 PM > Searching for a phone. Please wait...
INFO : 7/27/2021 12:35:50 PM > Detected phone model: SM-G935A
INFO : 7/27/2021 12:35:50 PM > Firmware compiled date: Thu Jan 17 21:13:43 KST 2019
INFO : 7/27/2021 12:35:50 PM > PDA version: G935AUCU8CSA3
INFO : 7/27/2021 12:35:50 PM > CSC version: G935AATT8CSA3
INFO : 7/27/2021 12:35:50 PM > SW version: G935AUCU8CSA3
INFO : 7/27/2021 12:35:50 PM > Build number: 11672825
INFO : 7/27/2021 12:35:50 PM > Phone SN: R38H50FY2ER
INFO : 7/27/2021 12:35:51 PM > Android version: 8.0.0 (R16NW)
INFO : 7/27/2021 12:35:51 PM > Sales code: ATT
INFO : 7/27/2021 12:35:51 PM > Country: USA
INFO : 7/27/2021 12:35:51 PM > HW platform: msm8996
INFO : 7/27/2021 12:35:51 PM > HW Chip: MSM8996
INFO : 7/27/2021 12:35:51 PM > HW Modem: MSM8996
INFO : 7/27/2021 12:35:51 PM > Security patch level: 2019-01-01
INFO : 7/27/2021 12:35:51 PM > Warranty Void: 0
INFO : 7/27/2021 12:35:51 PM > SIM 1 status: network locked
INFO : 7/27/2021 12:35:51 PM > Codename: hero2qlteuc
INFO : 7/27/2021 12:35:51 PM > -----------------------------------------------------------------------------------
WARN : 7/27/2021 12:35:51 PM > Connecting to server ..
INFO : 7/27/2021 12:35:51 PM > Username: jsf8nx4
INFO : 7/27/2021 12:36:05 PM > Connect to server successfull.
INFO : 7/27/2021 12:36:05 PM > Checking smart card...
INFO : 7/27/2021 12:36:23 PM > Your balance: 50 credits.
INFO : 7/27/2021 12:36:23 PM > -----------------------------------------------------------------------------------
INFO : 7/27/2021 12:36:23 PM > Rebooting phone
INFO : 7/27/2021 12:36:23 PM > Searching for a phone. Please wait...
INFO : 7/27/2021 12:37:41 PM > OK
INFO : 7/27/2021 12:37:45 PM > Rebooting phone
INFO : 7/27/2021 12:37:46 PM > Searching for a phone. Please wait...
INFO : 7/27/2021 12:39:08 PM > OK
INFO : 7/27/2021 12:39:12 PM > Rebooting phone in Upload Mode...
INFO : 7/27/2021 12:39:56 PM > Searching for a phone. Please wait...
INFO : 7/27/2021 12:39:59 PM > OK
INFO : 7/27/2021 12:40:03 PM > Reading data...
INFO : 7/27/2021 12:40:57 PM > OK
INFO : 7/27/2021 12:41:14 PM > Detecting security type...
INFO : 7/27/2021 12:41:20 PM > (1)
INFO : 7/27/2021 12:41:21 PM > Searching for signatures...
INFO : 7/27/2021 12:42:10 PM > OK
WARN : 7/27/2021 12:42:10 PM > Sending request...
INFO : 7/27/2021 12:42:38 PM > OK
INFO : 7/27/2021 12:42:42 PM > Calculating codes. Please wait...
WARN : 7/27/2021 12:42:49 PM > FREEZE: 73818079
WARN : 7/27/2021 12:42:49 PM > NET LOCK: 02507292
WARN : 7/27/2021 12:42:49 PM > SUB LOCK: 00000000
WARN : 7/27/2021 12:42:49 PM > SP LOCK: 00000000
WARN : 7/27/2021 12:42:49 PM > CP LOCK: 00000000
 

kabirsoft

Active Member
Oct 4, 2019
62
16
Reset FRP
Welcome to Octoplus Samsung Software v.4.2.0
Request timeout

Work ID: 0000000
Starting Reset FRP (Apr 2022)
Selected model: SM-A307GN
Connect powered-on phone on first page of activation stage to PC via USB.
Tap Emergency call on the first settings screen, then type *#0*#.
Searching modem port...
OK
Detected device model: SM-A307GN
Product name: XME
HW Version: A307GNDXS5CWC3/A307GNOLM5CVL1/A307GDXS5CWC3/A307GNDXS5CWC3
PDA version: A307GNDXS5CWC3
CSC version: A307GNOLM5CVL1
CP version: A307GDXS5CWC3
Device SN: RF8N317FBQK
Device IMEI: 351878-11-300634-4
Please wait...
Please type *#0*#. Wait until the HW Test screen appears. Then press 'Ok' to continue...
Failed, trying second method...
OK
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
OK
ADB connected
Rebooting device...
OK
Perform Factory Reset from phone menu.
Reset FRP (Apr 2022) done
Execution time 1 minute(s) 19 second(s)
Performed by 4.2.0 Software version.
 
Top