Logs
Code:
Welcome to Octoplus Box Samsung software version 2.6.8
-----------------------------------------------------------------------------------
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Press Home button.
13. Go to dial window.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G531H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: g531hxxu0aoi4_g531hoxe0aoi4_ser_android_
5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G531H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing WDSP section...
WDSP section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.8 Software version.