Recovering Motog4 plus XT1643 from HardBrick !!!!
NO fastboot, No recovery, just black screen, white led blinks when connected to charger or laptop
Connect your mobile to PC and open device manager in PC, you should see your mobile is detected as QBULK in unknown device or as qualcomm hs-usb qdloader 9008 in COM port.
If your mobile is not detected try pressing power button and volume button for somtime.
If your mobile is detected as qbulk, you should installqualcomm driver in pc
NO fastboot, No recovery, just black screen, white led blinks when connected to charger or laptop
Connect your mobile to PC and open device manager in PC, you should see your mobile is detected as QBULK in unknown device or as qualcomm hs-usb qdloader 9008 in COM port.
If your mobile is not detected try pressing power button and volume button for somtime.
If your mobile is detected as qbulk, you should installqualcomm driver in pc
Download the latest BlankFlash
Blank Flash.zip
Connect your Phone to PC( Your phone should Be detected as QualcommLoader**** or somthing like that in device manager under the ports section )
Once connected, extract the Blankflash zip and run Blank-Flash.bat
A command window will be open and it will flash some files to your phone....after 5-6 sec,
your Phone will be rebooted to Fastboot Mode
But process is not over yet....
Now download the latest Bootloader and GPT files for the version NPJS25.93-14-8
NPJS25.93-14-8
And Extract them into New folder. And don't forget to copy ADB and the fastboot files into that folder.
ADB and Fastboot
DOWNLOAD
Hold Shift key and Press right key on the mouse and click on open command window in that folder and Paste the following command and then press Enter :
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
Once done then You can see the Fastboot mode on your screen
The next step is easy, You just need to flash stock ROM, But you just can't flash older ROM i.e. downgrade this time, Otherwise your device can be bricked again...
So I will recommend you to download latest ROM NPJS25.93-14-8 and Flash it
ATHENE_NPJS25.93-14-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Download it and then just extract it in and don't forget copy ADB and the fastboot files into that folder. Once done then Hold shift and press right key on mouse then select Open Command window here from that menu.
then use this code to flash stock ROM
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
And that's it!! You will get your Athene Back to Life
