Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX

[umureyyan8729]

ACTION: Direct Unlock
Detecting phone, wait...
Using connection mode 1
Detected: SCI USB2Serial (COM55)

Platform Version: MOCORTM_18A_W20.18.1_P1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.18.1_P1
HW Version: sc9832e_modem
05-22-2020 14:39:46
Build number: sp9832e_1h10_gofu-user 10 QP1A.190711.020 27546 release-keys
EMMC DDR SIZE :8.00 GB+1.00 GB
UID: e85313b4c0700d993d99e1694dcfc71e469b8da7a42a4895f9 d7f5622f4459da

IMEI 1: 86235##########
IMEI 2: 86235##########
IMEI 3: 86740##########
IMEI 4: 86740##########
BT: 7CB37B394096
WIFI: 7CB37B399046
Reading simlock backup, wait....
Saved to: C:\Users\User\Documents\spreadtrum_module\diag_nvr am_backup\sp9832e_1h10_gofu-user 10 QP1A.190711.020 27546 release-keys_86235##########__diag_simlock_nvram_backup.ta r

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 45447328
Sim 2 Unlock Code: 45447338
Warning, this is factory key, some opperators can modify factory key.
Unlock is supported for this phone
Writing simlock...
Writing simlock ok
Done.
Log saved:
C:\Users\User\Documents\spreadtrum_module\Saved_Lo gs\sp9832e_1h10_gofu-user10QP1A.190711.02027546release-keys_86235##########_diag_simlock_unlock.txt

 

[Hlabs]

Samsung A032F extract Odin Firmware and Unbricking Successful with NCK PRO BOX
No Pac Firmware needed, Clean unbrick, no second stage after flashing.


ACTION: Flash Firmware.
Selected firmware: firmware_info.xml
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM8)
BOOT: SPRD3
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
[00:00:11] Sending first loader.
[00:00:16] Sending second loader.
[00:00:26] Second loader sent ok.
New flash metod detected.
Phone have super partition.
[00:00:26] Making flash ic repartition.
[00:00:26] Format: l_runtimenv1
[00:00:26] [l_runtimenv1]Format OK.
[00:00:26] Format: l_runtimenv2
[00:00:26] [l_runtimenv2]Format OK.
[00:00:26] Format: misc
[00:00:26] [misc]Format OK.
[00:00:26] Format: uboot
[00:00:26] [uboot]Format OK.
[00:00:26] Format: uboot_log
[00:00:26] [uboot_log]Format OK.
[00:00:26] Format: metadata
[00:00:26] [metadata]Format OK.
[00:00:26] Format: cache
[00:00:26] [cache]Format OK.
[00:00:26] Format: sysdumpdb
[00:00:26] [sysdumpdb]Format OK.
[00:00:26] Start write: l_deltanv
[00:00:27] Start write: trustos
[00:00:29] Start write: sml
[00:00:29] Start write: pm_sys
[00:00:31] Start write: teecfg
[00:00:31] Start write: uboot
[00:00:53] Start write: vbmeta
[00:00:54] Start write: gpsgl
[00:00:55] Start write: gpsbd
[00:00:56] Start write: wcnmodem
[00:00:58] Start write: l_gdsp
[00:01:07] Start write: l_ldsp
[00:01:24] Start write: l_modem
[00:01:48] Start write: boot
[00:02:41] Start write: recovery
[00:03:34] Start write: dtbo
[00:03:41] Start write: socko
[00:03:48] Start write: vbmeta_system
[00:03:48] Start write: super
[00:44:49] Start write: prism
[00:45:28] Start write: optics
[00:45:30] Start write: cache
[00:45:30] Start write: omr
[00:45:31] Start write: userdata
[00:49:08] Start write: splloader
Low Level Format Userdata
[00:49:08] Format: misc
[00:49:08] [misc]Format OK.
[00:49:08] Format: metadata
[00:49:08] [metadata]Format OK.
[00:49:08] Format: userdata
[00:49:08] [userdata]Format OK.
[00:49:08] Format: cache
[00:49:08] [cache]Format OK.
Flashing done.
If phone stuck on logo long time perform wipe from recovery or safe reset from exe
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.2.8

 

[GsmToto]

Hisense U50 successfully unlocked.

 

[GsmToto]

VORTEX HD65 choice unlock done