Post Here Successfully Unlocked/calculated/flashed/repaired Phones Via Nck Dongle

maanarman · Dec 26, 2018

Oppo A33F Factory Format Done

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Read Info
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM70) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 37
[0178039F]Userdata Size: 11.75 GB
Manufacturer: OPPO
Cpu: armeabi-v7a
Build Id: LMY47V
Model: A33f
Android Release: 5.1.1
Android Version: A33fEX_11_160926
Config: diag,serial_smd,rmnet_bam,adb
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\read_info_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F9.txt
Total Time: 00:00:14
Done.

Code:

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Factory Format
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM70) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.56 GB  Partitions count: 37
[0178039F]Userdata Size: 11.75 GB
[4096]Error untill process partition system
Partition can be encripted or corupted.
Resetting cache , wait
Total blocks 10
Resetting userdata , wait
Total blocks 123
Factory reset done, wait untill phone start
This can take up to 5 min on slow phones.
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_userdata_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F22.txt
Total Time: 00:00:23
Done.

maanarman · Dec 27, 2018

Samsung I9060I Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
 ----------------------------------------------------
 EMMC: (14Gb+2048Mb) SAMSUNG 0x4e3957524d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004E3957524D42 : 00000000000000
 EMMC UA SIZE: 0x70000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x70420000       [1.754 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: KOT49H
 Display ID: KTU84P.I9060IXMU0AOD2
 Version: 4.4.4
 Build Date: 2015年 09月 09日 星期三 10:13:27 CST
 Model: GT-I9060I
 Brand: samsung
 Device: best72_we_72_lca
 Manufacturer: samsung
 Region: US
 Mediatek Version Release: ALPS.KK1.MP6.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355795051538623
 IMEI[2] from NVRAM: 355795051538631
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4340000        - LEN: 0x1e800000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_samsung_GT-I9060I_4_4_4_ALPS_KK1_MP6_V1(2018_12_24_21_48)
 Wait untill phone will start charging.
 All done.

maanarman · Dec 29, 2018

Lenove S668t Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x4b3758564d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004B3758564D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: JDQ39
 Display ID: S668t_S030_141114
 Version: 4.2.2
 Build Date: Fri Nov 14 10:37:05 CST 2014
 Model: Lenovo S668t
 Brand: Lenovo
 Device: S668t
 Manufacturer: Lenovo
 Mediatek Version Release: ALPS.JB5.MP.V1.16
 Manufacturer: LENOVO
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 863526021909031
 IMEI[2] from NVRAM: 863526021909049
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x3f00000        - LEN: 0x200           
 Start processing RESV ......
 Reading:  BEGIN: 0x3f80000        - LEN: 0x80000         
 Start processing flex
 Reading:  BEGIN: 0x4000000        - LEN: 0x2800000       
 Start processing system
 Reading:  BEGIN: 0x7200000        - LEN: 0x48000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_Lenovo_Lenovo S668t_4_2_2_ALPS_JB5_MP_V1_16(2018_12_25_16_20)
 Wait untill phone will start charging.
 All done.

maanarman · Jan 7, 2019

Oale X1 Write Flash Done

Code:

 Flash files count is :10
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.6
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Jan 8, 2019

Oale X2 Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Wed Jun 28 21:12:23 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741101566876
 IMEI[2] from NVRAM: 354741101566884
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Partition: recovery seems damaged, skip saving..
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_12_18_18_59)
 Wait untill phone will start charging.
 All done.

maanarman · Jan 12, 2019

Lenovo A1010a20 Read Pattern Done

Code:

 Exe version: NCKDongle AndroidMTK 2.5.9.6
 Selected model: Lenovo  A1010a20
 Action: Read Pattern
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847346192
 EMMC FW VERSION: a2:00:00:00:00:00:00:00
 EMMC CID: 90014A483847346192 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 **************************************
 1 2 3
 4 5 6
 7 8 9
 Pattern: 4569
 **************************************
 Pattern HEX: 96B476DCD06D1B58B2DA625E143E49E00B8C0BBF
 **************************************
 Wait untill phone will start charging.
 All done.

maanarman · Jan 12, 2019

Qmobile A65 Write Flash Done

Code:

 Flash files count is :15
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.6
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 BBCHIP: 6572 0 ca00
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

maanarman · Jan 29, 2019

Samsung J310H Read FF Done

Code:

 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 BBCHIP: 6572 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
 EMMC FW VERSION: 58:00:00:00:00:00:00:00
 EMMC CID: 7001004D4D43303447 : 00000000000000
 EMMC UA SIZE: 0xe6800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe6c20000       [3.606 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: JDQ39
 Display ID: J7252_5.0_V1.23
 Version: 4.2.2
 Build Date: Tue May 23 11:42:41 CST 2017
 Model: SM-J500H
 Brand: Samsung
 Device: j7252
 Manufacturer: Samsung
 Region: US
 Mediatek Version Release: J7252_5.0_V1.23 20170523-1142
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x1400000       
 Start processing MBR
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000       
 Start processing nvram
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3f80000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4d40000        - LEN: 0x2bc00000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_Samsung_SM-J500H_4_2_2_J7252_5_0_V1_23 20170523-1142(2019_01_16_15_53)
 Wait untill phone will start charging.
 All done.

perata · Jul 5, 2019

remove frp alcatel 8063 pixi4 done
[url=https://www.0zz0.com]

[/URL]

Code:

 Exe version: NCKDongle AndroidMTK 2.6.0.0
 Selected model: 0-By CPU  ELBRUS
 [erase]Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
 Boot mode: Preloader
 BBCHIP: 8127 0 ca00
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT8127
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 29:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0x1ce100000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1ced00000      [7.231 GB]
 Checking data, wait...
 
 writing para!
 Erasing FRP, wait...
 [2]FORMAT - BEGIN: 0x37d80000       - LEN: 0x100000       
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

perata · Jul 17, 2019

REMOVE LOCK SCREEN ZATEC ZPAD DONE

[url=https://www.0zz0.com]

[/URL]

Code:

EXE: NckDongle Spreadtrum Module 1.0
SELECTED: SC7731G_EMMC  5.x
ACTION: Format Userdata(misc)
Start Detect phone...
Detected: SPRD U2S Diag (COM13)
Sending loader, keep boot key untill loader start.
Reconnecting .
Detected: SPRD U2S Diag (COM13)
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: SPRD
Hardware: SP7731GEA_HDR_V1.0.0
Platform: sc8830
Fota platform: Sprd7731_6.0
Board: sp7731gea_hdr
Build Id: MRA58K
Model: ZPAD
Android Release: 6.0
Android Version: MRA58K20170122
Security patch: 2016-05-01
This phone have frp partition.
[misc]Formating userdata, wait...
Format OK.
Wait untill phone will restart.
Total Time: 00:00:13
Done.

perata · Jul 21, 2019

REMOVE COMPTE GOOGLE VIWA I7 DONE

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

EXE: NckDongle Spreadtrum Module 1.0
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM13)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: VIWA
Hardware: SP7731C_V1.0.0
Platform: sc8830
Board: sp7731ceb_fs280
Build Id: MRA58K
Model: i7
Android Release: 6.0
Android Version: VIWA-i7-V08-20171208
Country: US
Security patch: 2017-11-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:15
Done.

perata · Jul 30, 2019

Remove FRP WIKO SUNNY 3

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

EXE: NckDongle Spreadtrum Module 1.0
SELECTED: SC9832E_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM50)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: WIKO
Hardware: k120_v1.1.0
Build Id: OPM2.171019.012
Build version: K120AG_8.1_WIK_ES_18
Model: Sunny3
Android Release: 8.1.0
Android Version: OPM2.171019.012 release-keys
Security patch: 2018-07-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:20
Done.

perata · Jul 31, 2019

Read pattern lock archos 70b Neon whitout lost data 5.1

Code:

 Exe version: NCKDongle AndroidMTK 2.6.0.0
 Selected model: 0-By CPU  ELBRUS
 Action: Read Pattern
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM19)
 Boot mode: Preloader
 BBCHIP: 8163 1 cb00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT8163
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 256 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 41:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0x1ce100000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1ce920000      [7.228 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM20)
 **************************************
 1 2 3
 4 5 6
 7 8 9
 Pattern: 74123
 **************************************
 Pattern HEX: CBE4C12958AB208CBA48401C53ECD9FF63F76E68
 **************************************
 Wait untill phone will start charging.
 [0]All done.

perata · Aug 10, 2019

Remove FRP Huawei VNS-L31 P9 Lite

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

Phone must be on, USB debugging must be enabled.
If Phone ask,accept authorization on screen.
Found Device:FUH7N16620009084
Model: HUAWEI VNS-L31
Platform Id: hi6250
OS Version: 7.0
Build Id: HUAWEIVNS-L31
Build version: VNS-L31C432B414
(GSM)RIL VERSION: android infineon balong-ril 1.0
Resetting FRP, wait....
Reset Done.

Br-PeraTa

thoiapple923 · Aug 10, 2019

perata said:

Remove FRP Huawei VNS-L31 P9 Lite

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

Phone must be on, USB debugging must be enabled.
If Phone ask,accept authorization on screen.
Found Device:FUH7N16620009084
Model: HUAWEI VNS-L31
Platform Id: hi6250
OS Version: 7.0
Build Id: HUAWEIVNS-L31
Build version: VNS-L31C432B414
(GSM)RIL VERSION: android infineon balong-ril 1.0
Resetting FRP, wait....
Reset Done.

Br-PeraTa

Thanks bro for info

Sent from my iPhone using Martview Forum

perata · Aug 13, 2019

Unlock Network Tecno N9S done

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

 Exe version: NCKDongle AndroidMTK 2.6.0.0
 Selected model: 0-By CPU  ELBRUS
 Action: Unlock
 Scanning for presents meta ports...
 Phone must be off with battery inside.
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [51]Detected: MediaTek PreLoader USB VCOM (Android) (COM51)
 \\?\usb#vid_0e8d&pid_2000#6&1923b7cb&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
 USB\VID_0E8D&PID_2007\6&1923B7CB&0&5
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6737m,S01
 Making target channel configuration, wait...
 Making tunnel configuration, wait...
 Rebooting to meta, wait....
 [META]BaseBand CPU : MT6735, E00
 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V90.P19
 [META]HW_VER : SR6737T_65_M0_HW
 Phone imei[1] : 3535----------------------
 Phone imei[2] : 35--------------------------
 Start direct unlock[SIM1]
 Direct unlock done
 Start direct unlock[SIM2]
 Direct unlock done
 Clean Boot flag ok.
 [0]All done.

Br-PeraTa

perata · Aug 14, 2019

Remove FRP Starlight isTar plus

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

 Exe version: NCKDongle AndroidMTK 2.6.0.0
 Selected model: 0-By CPU  ELBRUS
 [erase]Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) SANDISK 0x444634303136
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 450100444634303136 : 00000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Checking data, wait...
 
 writing para!
 Erasing FRP, wait...
 [2]FORMAT - BEGIN: 0x6a00000        - LEN: 0x100000       
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

Br-PeraTa

perata · Aug 19, 2019

Unlock Network Samsung G355H

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Br-PeraTa

perata · Sep 8, 2019

Remove FRP Sony C3312

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Br-PeraTa

perata · Sep 9, 2019

Repair imei Lenovo K50-T5

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

 Selected connection metod: Meta Connection
Exe version: NCKDongle AndroidMTK 2.6.0.0
Selected phone: ELBRUS
Action : IMEI REPAIR.
IMEI[1] for write : 866046028475214
IMEI[2] for write : 866046028475222
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[51]Detected: MediaTek PreLoader USB VCOM (Android) (COM51)
\\?\usb#vid_0e8d&pid_2000#6&1923b7cb&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[67]META Port Detected: Périphérique série USB (COM67)
USB\VID_17EF&PID_74ED&MI_02\7&3733CDDF&0&0002
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6752,S01
[AP]APP_VER: ALPS.L0.MP6.V3_LENOVO6752.LWT.L_P56
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6752, E00
[META]SW_VER : K50T5.LTG.V21
[META]HW_VER : LENOVO6752_LWT_L_MD1_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 86****************
Phone imei[1] : 8660*************
IMEI to repair: [2] 8660*************
Phone imei[2] : 866**************
Clean Boot flag ok.
[0]All done.

Br-PeraTa

Post Here Successfully Unlocked/calculated/flashed/repaired Phones Via Nck Dongle

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview