Post Here Successful Reports With Avengers Avengers Box/Dongle

Oct 4, 2018
9
15
NCK Team Projects
Skype
[email protected]
Sonork ID
100.8888
 
  • Like
Reactions: icanic

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Nokia 3 Read FF Avengers Dongle

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 02
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 13014E51324A39 : 000000000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 -Reading GPT Drive OK
 Build ID: O00623
 Display ID: 00WW_3_31C
 Version: 8.0.0
 Build Date: Fri Jun 8 19:03:39 CST 2018
 Model: 00WW
 Brand: Unknown
 Device: Unknown
 Manufacturer: alps
 Mediatek Version Release: alps-mp-o0.mp1-V3.47_k37mv1.64_P5
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start procesing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start procesing nvram
 IMEI[1] from NVRAM: 356049087600406
 IMEI[2] from NVRAM: 356049087600414
 Start procesing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start procesing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start procesing lk ......
 Start processing boot
 Start processing recovery
 Start procesing logo ......
 Start procesing secro
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000       
 Start procesing trustzone
 Start procesing box ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x800000       
 Start procesing sys_info ......
 Reading:  BEGIN: 0x7200000        - LEN: 0x100000       
 Start procesing sutinfo ......
 Reading:  BEGIN: 0x7300000        - LEN: 0x20000         
 Start procesing hidden ......
 Reading:  BEGIN: 0x7320000        - LEN: 0x2000000       
 Start procesing cda ......
 Reading:  BEGIN: 0x9320000        - LEN: 0x800000       
 Start procesing frp ......
 Reading:  BEGIN: 0x9b20000        - LEN: 0x100000       
 Start procesing nvdata ......
 Reading:  BEGIN: 0x9c20000        - LEN: 0x2000000       
 Start procesing system
 Reading:  BEGIN: 0xe000000        - LEN: 0x100000000     
 Saved to : C:\Users\Hamza\Documents\Android_MTK\firmware_backup\MT6737M_EMMC_Unknown_00WW_8_0_0_alps-mp-o0_mp1-V3_47_k37mv1_64_P5(2018_08_03_07_06)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung J7 Factory Reset Done

Code:
 Action : Format UserData.
 Selected 0-By CPU:MT6571_EMMC
 Exe version: Avengers Box MTK 0.4.9
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM40)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 1.
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
 EMMC FW VERSION: 58:00:00:00:00:00:00:00
 EMMC CID: 7001004D4D4330 : 000000000000000000
 EMMC UA SIZE: 0xe6800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe6c20000       [3.606 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: CACHE  begin: 0x2cb40000        length: 0x1400000       
 Partition: USRDATA  begin: 0x2df40000        length: 0xb77e0000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile S2 Write FF With Avengers Dongle

Code:
 Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6571_EMMC
 Exe version: Avengers Box MTK 0.4.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM9)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 1.
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A48384731 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Motorola Xt1762 Factory Reset done

Code:
 Action : Format UserData.
 Selected 0-By CPU:MT6571_EMMC
 Exe version: Avengers Box MTK 0.4.9
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM9)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
 EMMC FW VERSION: a5:00:00:00:00:00:00:00
 EMMC CID: 90014A48414734 : 000000000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0xde800000        length: 0x19000000     
 Partition: userdata  begin: 0xf7800000        length: 0x2b0080000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
J7 factory reser done

Code:
 Action : Format UserData.
 Selected 0-By CPU:MT6571_EMMC
 Exe version: Avengers Box MTK 0.4.9
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 1.
 ----------------------------------------------------
 BaseBand CPU :MT6589
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 86:00:00:00:00:00:00:00
 EMMC CID: 90014A48344731 : 000000000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: CACHE  begin: 0x32f00000        length: 0x7e00000       
 Partition: USRDATA  begin: 0x3ad00000        length: 0xab400000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Moto E4 factory data reset done

Code:
 Action : Format UserData.
 Selected 0-By CPU:MT6571_EMMC
 Exe version: Avengers Box MTK 0.4.9
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM9)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 2.
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
 EMMC FW VERSION: a5:00:00:00:00:00:00:00
 EMMC CID: 90014A48414734 : 000000000000000000
 EMMC UA SIZE: 0x3ab400000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac000000      [14.688 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 -Reading GPT Drive OK
 Detecting format adress....wait!
 Starting generic userdata format...!
 Partition: cache  begin: 0xde800000        length: 0x19000000     
 Partition: userdata  begin: 0xf7800000        length: 0x2b0080000     
 Phone can start slow at first power on
 If phone stuck on logo, perform wipe from recovery.
 First start can take up to 5 min on some phones.
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile i5 imei repair done

Code:
 Selected connection metod: Meta Connection
 Exe version: Avengers Box MTK 0.4.9
 Selected phone: MT6571_EMMC
 Action : IMEI REPAIR.
 IMEI[1] for write : 353456789123459
 IMEI[2] for write : 353456789012348
 Scanning for presents meta ports...
 Phone must be off with battery inside.
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [9]Detected: PreLoader USB VCOM Port (COM9)
 \\?\usb#vid_0e8d&pid_2000#6&3aa03edd&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [204]META Port Detected: Gadget CDC VCOM Driver (COM204)
 USB\VID_0E8D&PID_2007\6&3AA03EDD&0&2
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : MT6582,S01
 [META]BaseBand CPU : MT6582, E01
 [META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V34
 [META]HW_VER : TINNO82_WET_KK_HSPA_HW
 Meta mode conected ok, start reading phone....
 IMEI to repair: [1] 353456789123459
 Phone imei[1] : 353456789123459
 IMEI to repair: [2] 353456789012348
 Phone imei[2] : 353456789012348
 Clean Boot flag ok.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Moto E4 FRP Remove With Avengers Dongle

Code:
Phone must be on, USB debugging must be enabled.
If Phone ask,accept authorization on screen.
Found Device:ZY224N947J
Model: Moto E (4)
Platform Id: msm8937
OS Version: 7.1.1
Build Id: NDQS26.69-64-8
Build version: NDQS26.69-64-8
(GSM)RIL VERSION: Qualcomm RIL 1.0
Resetting FRP, wait....
Reset Done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale Write FF done Avengers Dongle

Code:
 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6571_EMMC
 Exe version: Avengers Box MTK 0.4.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM9)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 1.
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F4012242697769 : 000000000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 
Oct 4, 2018
9
15
NCK Team Projects
Skype
[email protected]
Sonork ID
100.8888
Vivo V5s - Vivo 1713 FRP Reset Done
PD1612DF_EX_A_3.8.3 FRP Reset Done
PD1612DF_EX_A_3.9.1 FRP Reset Done




Exe version: Avengers Box MTK 0.5.5
Selected model: v5s
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek USB Port (COM141)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6755 1 cb00
Using Algo 3.
Helio MT6755 phone detected, swithing to helio api
Loading Custom Preloader
BBCHIP MT6755
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010052483634 : 000000000000000000
EMMC UA SIZE: 0xe8f800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe90400000 [58.254 GB]
-Reading GPT Drive OK
Starting helio frp, not disconnect phone untill done
[0]FRP Reset Done.
[2]FRP Reset Done.
All done.

 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile Blue 5 Remove FRP Done

Code:
 Exe version: Avengers Box MTK 0.4.9
 Selected model: MT6571_EMMC
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM16)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 Using Algo 1.
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
 EMMC FW VERSION: 03:00:00:00:00:00:00:00
 EMMC CID: 15010046453632 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.
 

diesel6

Active Member
Nov 9, 2018
50
10
punjab(india)
Skype
diesel6255
Sonork ID
100.1654770
alcatel 5047y network unlock done

Exe version: Avengers Box MTK 0.5.7
Selected model: Alcatel OT-5047Y
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM25)
Boot mode: Brom
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM26)
[5][error read imei]Warning, imei posible damaged!!.
Reading security, wait...
[3140]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.
 

diesel6

Active Member
Nov 9, 2018
50
10
punjab(india)
Skype
diesel6255
Sonork ID
100.1654770
panasonic p91 frp reset done

Exe version: Avengers Box MTK 0.5.7
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Will be used loader: DA_SWSEC P91.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 150100464531324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
 

diesel6

Active Member
Nov 9, 2018
50
10
punjab(india)
Skype
diesel6255
Sonork ID
100.1654770
nokia 1 frp reset done

Exe version: Avengers Box MTK 0.5.7
Selected model: Nokia Nokia 3
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
 

diesel6

Active Member
Nov 9, 2018
50
10
punjab(india)
Skype
diesel6255
Sonork ID
100.1654770
nokia 1 pettren remove done

Action : Format UserData.
Selected Nokia:Nokia 3
Exe version: Avengers Box MTK 0.5.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 02
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM26)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0x76000000 length: 0x9800000
Partition: userdata begin: 0x7f800000 length: 0x151780000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
 

diesel6

Active Member
Nov 9, 2018
50
10
punjab(india)
Skype
diesel6255
Sonork ID
100.1654770
oppo a83 pettren remove done

Action : Format UserData.
Selected OPPO:A83
Exe version: Avengers Box MTK 0.5.7
Reinsert phone battery.
Battery must be charged.
Keep VOL- button untill inserting USB cable.
Detected : MediaTek USB Port (COM25)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6763 1 ca01
Using Algo 3.
Helio MT6763 phone detected, swithing to helio api
Loading Custom Preloader
BBCHIP MT6763
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 90014A48424734 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM26)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0x160800000 length: 0x10000000
Partition: userdata begin: 0x170800000 length: 0x5d63fbe00
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.
 

diesel6

Active Member
Nov 9, 2018
50
10
punjab(india)
Skype
diesel6255
Sonork ID
100.1654770
oppo a83 frp remove done

Exe version: Avengers Box MTK 0.5.7
Selected model: OPPO A83
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Keep VOL- button untill inserting USB cable.
Detected : MediaTek USB Port (COM25)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6763 1 ca01
Using Algo 3.
Helio MT6763 phone detected, swithing to helio api
Loading Custom Preloader
BBCHIP MT6763
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 90014A48424734 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Starting helio frp, not disconnect phone untill done
[0]FRP Reset Done.
All done.
 
Top