Motorola XT1526 DEAD BOOT REPAIR DONE

Status
Not open for further replies.

ross_rafi

Junior Member
Jul 29, 2017
3
4
hyderabad
Welcome to Medusa Pro Software version 1.5.8.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic EMV Smartcard Reader 0
Reader #3: Generic EMV Smartcard Reader 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC QN1SMB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100514E31534D42015C49DA292347
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QN1SMB
Product revision : 0.1
Product serial number : (hex) 5C49DA29
Manufacturing date : 02/2016
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes

Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QN1SMB_08_05_2018_17_33_51.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.8; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 00000800) 1024 KB
P05: rpm (000211B8, 000001F4) 250 KB
P06: tz (000215A0, 000003E8) 500 KB
P07: hyp (00021988, 00000100) 128 KB
P08: utags (00021D88, 00000400) 512 KB
P09: logs (00022188, 00001000) 2048 KB
P10: sec (00023200, 00000020) 16 KB
P11: factorytune1 (00023300, 00001B88) 3524 KB
P12: padA (00024E88, 00000D78) 1724 KB
P13: metadata (00025C00, 00000400) 512 KB
P14: abootBackup (00026000, 00000800) 1024 KB
P15: rpmBackup (00026BB8, 000001F4) 250 KB
P16: tzBackup (00026FA0, 000003E8) 500 KB
P17: utagsBackup (00027388, 00000400) 512 KB
P18: hypBackup (00027788, 00000100) 128 KB
P19: padB (00027B88, 00002478) 4.559 MB
P20: frp (0002A000, 00000400) 512 KB
P21: modemst1 (0002A400, 00000C00) 1536 KB
P22: modemst2 (0002B000, 00000C00) 1536 KB
P23: hob (0002BC00, 000003D0) 488 KB
P24: dhob (0002BFD0, 00000040) 32 KB
P25: fsg (0002C100, 00000C00) 1536 KB
P26: fsc (0002CD00, 00000002) 1024 b
P27: ssd (0002CD02, 00000010) 8 KB
P28: cid (0002CD12, 00000100) 128 KB
P29: logo (0002CE12, 00002000) 4 MB
P30: clogo (0002EE12, 00002000) 4 MB
P31: persist (00030F00, 00004000) 8 MB
P32: misc (00034F00, 00000400) 512 KB
P33: boot (00035300, 00010000) 32 MB
P34: recovery (00045300, 0000FFE0) 31.98 MB
P35: factorytune2 (000552E0, 00005070) 10.05 MB
P36: kpan (0005A400, 00004000) 8 MB
P37: padC (0005E400, 00001C00) 3584 KB
P38: sp (00060000, 00008000) 16 MB
P39: keystore (00068000, 00008000) 16 MB
P40: oem (00070000, 00008000) 16 MB
P41: carrier (00078000, 00008000) 16 MB
P42: system (00080000, 00388000) 1808 MB
P43: cache (00408000, 00080000) 256 MB
P44: userdata (00488000, 00A07F00) 5.016 GB
Backuping Gpt partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QN1SMB_Gpt_0x0_0x100_08_05_2018_17_33_51.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.8; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QN1SMB_Cid_0x2cd12_0x100_08_05_2018_17_33_51.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.5.8; FW: 1.23.
Selected file: C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition hyp... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition carrier... Done.
Writing partition system (7 parts):
Writing from file C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/system.img_sparsechunk.0 (1/7)... Done
Writing from file C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/system.img_sparsechunk.1 (2/7)... Done
Writing from file C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/system.img_sparsechunk.2 (3/7)... Done
Writing from file C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/system.img_sparsechunk.3 (4/7)... Done
Writing from file C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/system.img_sparsechunk.4 (5/7)... Done
Writing from file C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/system.img_sparsechunk.5 (6/7)... Done
Writing from file C:/Users/Niaz Khan/Desktop/New folder/SURNIA_BOOST_5.1_LPI23.29-18-S.2_cid9_subsidy-DEFAULT_CFC.xml signal ok file/system.img_sparsechunk.6 (7/7)... Done
Writing partition system... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.5.8; FW: 1.23.
Disconnected.
 
Status
Not open for further replies.
Top