Free Htc desire 526g+ dual sim mt6592 stock firmware with flash tool and dead solution

malikahmad1

-:VIP Member:-
Dec 11, 2016
248
375
shahbaz mobile liaqat chowk SAHIWAL
Skype
malikahmad926
Sonork ID
1642466

Repair Hub

Most ViP
Oct 6, 2018
239
301
Pakistan
Skype
RepairHub
Stock Rom For HTC 526G+ Dual Sim working 100%
Htc 526G Plus Stock Rom working with unlock bootloader image
Flashing Instruction
1) Flash without battery
2) Select scatter file doesn't change anything after it selects automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) click on the download button of sp tool
5) Press & Hold volume (+, -) of the device
6) Connect USB cable to the device holding with volume keys (+, -)
7) Wait till flashing starts
8) After completing flash Disconnect the device put the battery & turn it ON

Hope It Works For All Of You

INSTRUCTIONS For Those Having Error with Going Back To Stock
Errors are like 6045, 4032 etc
1) Flash with battery
2) Select scatter file doesn't change anything after it selects automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) Select Firmware upgrade in the download section
5) click on the download button of sp tool
6) Press & Hold volume (+, -) of the device
7) Connect USB cable to the device holding with volume keys (+, -)
8) Wait till flashing starts
9) After completing flash Disconnect the device remove & put the battery & turn it ON


Download link
https://drive.google.com/file/d/0B7h...91UmZjc2M/view
 
Reactions: pankaj gadodiya

pankaj gadodiya

Product Supporter
Aug 31, 2018
111
18
India delhi gaffar market
Stock Rom For HTC 526G+ Dual Sim working 100%
Htc 526G Plus Stock Rom working with unlock bootloader image
Flashing Instruction
1) Flash without battery
2) Select scatter file doesn't change anything after it selects automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) click on the download button of sp tool
5) Press & Hold volume (+, -) of the device
6) Connect USB cable to the device holding with volume keys (+, -)
7) Wait till flashing starts
8) After completing flash Disconnect the device put the battery & turn it ON

Hope It Works For All Of You

INSTRUCTIONS For Those Having Error with Going Back To Stock
Errors are like 6045, 4032 etc
1) Flash with battery
2) Select scatter file doesn't change anything after it selects automatically
3) Make sure download-agent is MTK_AllInOne_DA.bin
4) Select Firmware upgrade in the download section
5) click on the download button of sp tool
6) Press & Hold volume (+, -) of the device
7) Connect USB cable to the device holding with volume keys (+, -)
8) Wait till flashing starts
9) After completing flash Disconnect the device remove & put the battery & turn it ON


Download link
https://drive.google.com/file/d/0B7h...91UmZjc2M/view

Working good Thanks....