New FIRMWARE SAMSUNG J700F MT6572 BY NCK DONGLE

perata

Friend's Martview
Dec 21, 2016
1,778
1,469
morocco
Peace, mercy and blessings of God

FIRMWARE SAMSUNG J700F MT6572

INFO
Code:
 Action : Boot Info.
 Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.7
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM179)
 Boot mode: Preloader
 BBCHIP: 6572 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
 ----------------------------------------------------
 EMMC: (14Gb+2048Mb) SAMSUNG 0x4e3958524d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 1501004E3958524D42 : 00000000000000
 EMMC UA SIZE: 0x70000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x70420000       [1.754 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM180)
 Build ID: JDQ39
 Display ID: IMM761.J700FZCALK2
 Version: 4.4.2
 Build Date: Tue Feb 28 11:27:52 CST 2017
 Build Date: 1488252472
 Model: SM-J700F
 Brand: Samsung
 Device: rtech72_wet_lca
 Manufacturer: samsung
 Region: EN
 Mediatek Version Release: ALPS.JB3.MP.V1
 IMEI[1]: 357------------
 IMEI[2]: 357------------
 
Read done.
 Wait untill phone will start charging.
 All done.

INFO READ

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM179)
 Boot mode: Preloader
 BBCHIP: 6572 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
 ----------------------------------------------------
 EMMC: (14Gb+2048Mb) SAMSUNG 0x4e3958524d42
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 1501004E3958524D42 : 00000000000000
 EMMC UA SIZE: 0x70000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x70420000       [1.754 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM180)
 Build ID: JDQ39
 Display ID: IMM761.J700FZCALK2
 Version: 4.4.2
 Build Date: Tue Feb 28 11:27:52 CST 2017
 Model: SM-J700F
 Brand: Samsung
 Device: rtech72_wet_lca
 Manufacturer: samsung
 Region: EN
 Mediatek Version Release: ALPS.JB3.MP.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x600000       
 Start processing MBR
 Reading:  BEGIN: 0x600000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x680000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x700000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 357------------
 IMEI[2] from NVRAM: 357------------
 Start processing PROTECT_F
 Reading:  BEGIN: 0xf00000         - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1900000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x2f80000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x3d40000        - LEN: 0x28a00000     
 Saved to : C:\Users\M\Documents\Android_MTK\firmware_backup\MT6572_EMMC_Samsung_SM-J700F_4_4_2_ALPS_JB3_MP_V1(2019_03_17_01_08)
 Wait untill phone will start charging.
 All done.

FIRMWARE
MEGA

And peace be upon you
 
  • Like
Reactions: bdmalek
Top