★★ Post Here All Successful Stories By Infinity-Box CM/CM2- ★★

[nasiraslam]

Innjoo One LTE HD read firmware with cm2


Brand : InnJoo
ProdName : ONE LTE HD
ProdModel : ONE LTE HD
Device : ONE LTE HD
AndroidVer: 4.4.4
MTKxCPU : MT6752
MTKxPRJ : ALPS.KK2.MP13.V1.16

[Read Ok] : preloader_d216f_xth.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6752 / V1.1.2 / d216f_xth / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1307 MiB
Scatter saved to : C:\Users\ideal\Desktop\MT6752__InnJoo__ONE_LTE_HD__ONE_LTE_HD__4.4.4__ALPS.KK2.MP13.V1.16\

All done!

Done!
Elapsed: 00:05:12
Reconnect Power/Cable!

 

[nasiraslam]

QTab_V2_2018 RKT read flash done with cm2


----- > Phone/Tablet :

1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!

----- > IoT/Box :

1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]


SoC CPU : 312A

Flash CSx : 0x00
Flash Type : 2C64643CA5 [ NAND ]
Flash Vend : MICRON
Flash Size : 0x000000020A000000 ( 8.16 GiB )
Flash Info : 8388608/16384/32/40/1

Connect Ok!

Brand : QTab
ProdName : QTab_V2_2018
ProdModel : V2 2018
Device : V2_2018
AndroidVer: 8.1.0
Manufact. : Qmobile
SysPatch : OPM6.171019.030.E1
RKTxPRJ : QTab_V2_2018_V1.7_2018-08-31

DevInfo : Qmobile__QTab__ANDR_v8.1.0__V2_2018__V2_2018__QTab_V2_2018__QTab_V2_2018_V1.7_2018-08-31

Reading Flash Content ...

[Read Ok] : param.cfg
[Read Ok] : u-boot.img
[Read Ok] : trust.img
[Read Ok] : misc.img
[Read Ok] : resource.raw
[Read Ok] : kernel.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : backup.img
[Read Ok] : security.bin
[Read Ok] : system.img
[Read Ok] : vendor.bin
[Read Ok] : oem.img

Read finished!
Configuration : / 2C64643CA5 [ NAND ]
Firmware Size : 1776 MiB

Done!
Elapsed: 00:03:39

 

[Deepesh Sharma]

Intex aqua sTRONG 5.1+ REMOVE FRP LOCK

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys

-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 51 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000001428F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:30

Reconnect Power/Cable!

 

[Deepesh Sharma]

samsung B310 Dead Recover

Card found: S/N : 32839D89 , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SPD6530_SAMSUNG

FastCheck : SPD65xx
Load file...
Platform : MOCOR_W13.09_FP_R5.0.2_Debug
sc6500_samsung_PitonDS_SWA
ExtInfo : LevelofLock 00000000 00000000
Project : SC6500_SAMSUNG
HWInfo : SC6500_EiderVEDS
Compile : 05-15-2014 17:09:38
Load Ok


Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : SPD6530_SAMSUNG_00800000_MOCOR_W13.09_FP_R5.0.2_Debug_sc6500_samsung_PitonDS_SWA_05152014170938_English__Samsung-SM-B310E.bin

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 51 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00EF 0060 0017 0000
[0] Flash VEN : Winbond , W25Q64
[0] Flash CAP : 00800000

======= Flashing MCU
Mapping file ...
Mapping done
Processing file : SPD6530_SAMSUNG_00800000_MOCOR_W13.09_FP_R5.0.2_Debug_sc6500_samsung_PitonDS_SWA_05152014170938_English__Samsung-SM-B310E.bin
Init ok, send data
Flashing Done!

Info : In some cases after flash required make "Format Fs / Reset Phone"

Done!


Elapsed: 00:01:57

Reconnect Power/Cable!

 

[Deepesh Sharma]

iNTEX LION t1 LITE Stuck On Logo Solved

 

[Deepesh Sharma]

iNTEX LION t1 LITE Read Pac Infinity FIle

 

[Deepesh Sharma]

iNTEX LION t1 LITE Convert Infinity Sc To Spd Pac Factory File

Please login to view image

 

[Deepesh Sharma]

Samsung 1200Y Dead Recover

Please login to view image

 

[Deepesh Sharma]

Samsung 1200Y Repair Security

Please login to view image

 

[Repair Hub]

LENOVO PHAB 2 PLUS (PB2-670M) FRP (Google Account) Remove Done

Please login to view image

Please login to view image

Operation : Reset Settings/Format FS [ v2.04 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM16)
MODE : BOOTROM
PORT : 16
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
MODE : Lenovo : PB2-650M | Manual : Enabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC_CRYPTO20_0403.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 150100525831424D4207F059D41605BB
DAInf: 4 : 2 : 147
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 520001154D42315859F00742BB0516D4
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 :  [ 0 B ] ]
DRAM : DRAM: 0xC0000000 [ 3.00 GB ]
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100525831424D4207F059D41613BB
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : A0F81C25AD129CF3929210BB36BF023F

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM17)
MODE : PRELOADER PORT
PORT : 17

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:47

Reconnect Power/Cable!

 

[nasiraslam]

Samsung galaxy a8+ flash file read with cm2

Please login to view image

[AP] : Initial info read Ok!

Brand : ZX
ProdName : ZX
ProdModel : ZX
Device : ZX
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_YUANDA6580.WE.L

MODEM :
BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P2_1_wg_n

EXTRA :
LCD : Not info available
LCD Res : 1440x720
TOUCH [0] : STOM_KERNEL_TOUCHPANEL
TOUCH [1] : =ft6336_gesture
TOUCH [2] : GT9XX
CAM [0] : gc2385_sub_mipi_raw
CAM [1] : mn045_mipi_raw
CAM [2] : sp2609_sub_mipi_raw
CAM [3] : hi556_mipi_raw
CAM [4] : sp250a_sub_mipi_raw
CAM [5] : ov5670_mipi_raw
MODEM : yuanda6580_weg_l_hspa_J7_850_1900_2100_simhotswap
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP sr_RS sl_SI ca_ES af_ZA az_AZ zu_ZA ca_ES lo_LA

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

 

[Deepesh Sharma]

Micromax E481 Vibrate Only Successfully Recovered

Please login to view image

 

[Deepesh Sharma]

Micromax E481 Fix Dl Image Error

Please login to view image

 

[Deepesh Sharma]

Gionee P3S Remove Frp Lock

Please login to view image

 

[FactoryFilePak]

QMobile S1 MTK6582 Logo Fix Done Flashing By Infinity Box​

Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6582 , Project : s5222 , Storage : EMMC
Files found : 11 , Set to Flash : 10
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505074ED62C1AA287
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505074ED62C1AA287
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x2B142F0335577A8AAFEC44A8A6A93AEC
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : s5222 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3617 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000C00000-0x0000000000100000
Erase : 0x0000000002900000-0x00000001CEE00000
Flash Pre-Erase Done, time used : 00:00:08

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_s5222.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:36

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:01:27

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:05:29
Reconnect Power/Cable!


Br
FactoryFilePak​

 

[Akhtar Ali Jatt]

MAXX T110 Format Done

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_157 744443EB3_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

 

[Akhtar Ali Jatt]

Moto Xt912 Operation : Reset Settings Done


Operation : Reset Settings [ v1.03 ]
Mode : Format FS

Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!

Block [1] ERASE OK!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:16

 

[Akhtar Ali Jatt]

VGOTEL VentureV10 Read FFw Done


Operation : Read Firmware [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 422201F46E69776900001020A3452D1B
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: F40122426977696E201000001B2D45A3
EMMC: VEN : BIWIN | OEM : 2201 | DEV : Biwin
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x39A000000 [ 14.41 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2BAA52B0FBBAFD001FFBCE766831BEA9

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-06-05
Build Time : 1531304533
Display ID : VGOTEL_VentureV10_V17
Product Model : VentureV10
Product Brand : VGOTEL
Product Name : VentureV10
Product Device : VentureV10
Product Info : VentureV10
Product Board : VentureV10
Product Manfct : TEM
Product Board : yk736_v35_go_wcdma
Board Platform : mt6580

MT6580__TEM__VentureV10__8.1.0__VGOTEL_VentureV10_ V17__O11019__VentureV10


SecureDevice : Paired type!
-> INFO : That device WILL dead after ReadOut Flashing!
-> INFO : Only partial flashing ( f.e. SYSTEM, VENDOR and etc. ) available!
-> INFO : In most cases you can "unsecure" device in Engineer mode

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 53%
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 24%
Read : cache.img
Read : userdata.img

FW Size : 1.30 GB
Android Info saved : _Android_info.txt
Scatter : MT6580_Android_scatter.txt
Saved to : C:\Users\AkhtarAli\Desktop\MT6580__TEM__VentureV10 __8.1.0__VGOTEL_VentureV10_V17__O11019__VentureV10 \

Done!
Elapsed: 00:05:59

 

[Akhtar Ali Jatt]

Moto Xt912 Operation : Reset Settings Done


Operation : Reset Settings [ v1.03 ]
Mode : Format FS

Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!

Block [1] ERASE OK!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:16

 

[Akhtar Ali Jatt]

VgoTel Venture V8 Format Done


Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 450001704543414822160141B1839698
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 700100454841434541011622989683B1
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EHACEA
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A5000000 [ 14.58 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 7648670B801A111E33D4311B912C321

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!